INTRODUCING The "GRAB-N-GO!" Rifle Holder ™ by TAD Enterprises
INTRODUCING The GRAB-N-GO! Rifle Holder by TAD Enterprises The Patriot and Minute-Man models
The Patriot model The Minute-Man model The Grab-N-Go! shown here mounted onto the back of a closet door.
The Grab-N-Go! shown here mounted onto the inside of a gun safe door. Patriot vs Minute-Man models; the design differences and choices.
The Patriot model is designed for a stock AR out-of-the-box carbine (@ 16.1) barrel length configuration of .223 caliber (5.56) rifle. The Minute-Man model is designed for AR carbine rifles having custom attachment capabilities such as key-mod and/or Picatinny rail systems.
Constructed of pressed hardwood backboard, soft wood upper cradle and lower barrel receiver block. Provides offsets of 1, 1.5 and 2 for clearance of custom components such as spotlights, laser dot pointer systems, and permits them to remain attached while stored with the GrabN-Go!. (Consult your supplier for specifying desired offset).
Weighs less than 1-1/2 lbs for shipping. Measures L21 X W5 and less than 4 height. Produced with a shop-made reinforced soft wood backboard, soft wood upper cradle and lower barrel receiver block. Can be produced on a customized basis to fit virtually any sized barrel length rifle (or pistol) and optional caliber (ie: .308 / 7.62; 9mm; or 22 caliber).
Weighs under 3-1/2 lbs for shipping. (Length and Width dimensions are subject to customer's customization requests). Patriot and Minute-Man models: Both Patriot and Minute-Man models are available in Right-Hand or Left-Hand configurations upon special order requests. Consult your supplier. The Grab-N-Go! is designed for vertical installation, indoors use only, and its design provides for a positive lean of the rifle into the upper cradle with Secure-Fit retention technology. (Freedom-Action available upon custom order request.)
Both models are entirely wrapped with a commercial grade polyester felt, produced from 100% recycled water bottles, providing protection and quiet functionality. Units are produced with pre-drilled mounting holes and may be fastened with screws, wall anchors, sheet rock anchors, toggle bolts or other suitable fasteners of your choice. Patriot and Minute-Man models.
Produced to our U.S. Patent Pending design, the Grab-N-Go! includes a flexible-hard-pocket for magazine storage. (U.S. Patents and Trademarks Pending). The Patriot model The Minute-Man model
Make your rifle Aeternum Paratum - Forever Ready! U.S. Patents and Trademarks Pending. Visit us at www.grabngo.us Thank you for viewing.
Regional COPD Pre-printed Orders & Discharge Plan Standardizing Improved COPD Management Across the Lower Mainland Learning Objectives COPD prevalence, admission rates, and economic burden in Canada & BC What COPD management looked like in 2009 How to improve COPD care...
/ State Affiliates (MAAE, MACTA, MBITE, MAFCS, MTEEA, MnACTE /SNP) - Max Peterson, MDE & Other Team Members. Questions/ Comments/ Adjournment - Ginny Karbowski & Other Team Members. Ginny: We will share what studies show about the first year of...
The case developed for the exercise is the construction of a new irrigation scheme including a dam construction for agricultural production. This is considered a measure for adapting to increasing water scarcity from climate change. The CBA accounts cost and...
Transmembrane Transport of Ions and Small Molecules. 11.3 ATP-Powered Pumps and the Intracellular Ionic Environment. Four classes of transmembrane proteins couple energy released by ATP hydrolysis with energy-requiring transport of substances against their concentration gradients.
Ready to download the document? Go ahead and hit continue!