L x.y PowerPoint Name - Mrs. Laing's Class

L x.y PowerPoint Name - Mrs. Laing's Class

Introduction to Dimensioning 1. Dimensions should reflect actual size of the object, not the scaled size. The dimension measured on the drawing is in., but

the actual dimension of the part is 2 in. Therefore, show 2.00 on drawing. 2. Include overall dimension in the three principle directions width, height, and depth.

Overall dimensions should be placed the greatest distance away from the object so that intermediate dimensions can nest closer to the object.

2. Include overall dimension in the three principle directions width, height, and depth. Overall dimensions should be placed the greatest

distance away from the object so that intermediate dimensions can nest closer to the object. 3. Include all dimensions necessary to produce or inspect the part.

Dimensions should be placed so that it is not necessary to calculate or scale a dimension. Incorrect

? ? 3. Include all dimensions necessary to produce or inspect the part.

4. Do not include unnecessary dimensions. Dimensions should NOT be duplicated or the same information given in two different ways. DUPLICATED

Incorrect 4. Do not include unnecessary dimensions. Do not include chain dimensions that add up to a given overall dimension.

Provides the same information in two different ways. Incorrect

4. Do not include unnecessary dimensions. 5. Dimensions should be attached to the view that best shows the contour of the feature to be dimensioned.

Incorrect 5. Dimensions should be attached to the view that best shows the contour of the feature to be dimensioned.

6. A dimension should be attached to only one view; for example, extension lines should not connect two views. Incorrect

6. A dimension should be attached to only one view; for example, extension lines should not connect two views. 7. Whenever possible, locate dimensions between adjacent views.

Incorrect 7. Whenever possible, locate dimensions between adjacent views.

8. Avoid dimensioning to hidden lines. Incorrect 0.75 8. Avoid dimensioning to hidden lines.

0.75 9. Do not place dimensions on the object unless it is absolutely necessary.

Incorrect 9. Do not place dimensions on the object unless it is absolutely necessary. 10. Do not cross a dimension line with another

dimension line or with an extension line. 10. Do not cross a dimension line with another dimension line or with an extension line. 11. Avoid crossing dimension or extension lines

with leader lines. Incorrect 11. Avoid crossing dimension or extension lines with leader lines.

0.50 THRU 12. Leader lines point toward the center of the feature and should not occur horizontally or vertically.

13. Dimension numbers should be centered between arrowheads, except when using stacked dimensions, and then the numbers should be staggered.

Incorrect 13. Dimension numbers should be centered between arrowheads, except when using stacked dimensions, and then the numbers should be staggered.

14. In general, a circle is dimensioned by its diameter and an arc by its radius. 15. Holes should be located and sized in the view that shows the feature as a circle.

Incorrect 15. Holes should be located and sized in the view that shows the feature as a circle.

16. Holes are located by their centerlines, which may be extended and used as extension lines. References Bertoline, G. (2003). Technical graphics communication.

(3 ed.). Boston, MA: McGraw-Hill. Giesecke, F. [et al.] (1991). Technical drawing. (9 ed.). New York, NY: Macmillan Pub. Co. Madsen, D., Folkestad, J., Schertz, K., Shumaker, T., Stark, C., & Turpin, J. (2002). Engineering drawing and design. (3 ed.). Albany, NY: Delmar Thomas Learning.

Recently Viewed Presentations

  • Youth Adult Partnerships: Cultivating agency in youth and adults

    Youth Adult Partnerships: Cultivating agency in youth and adults

    As a way to recap on the information presented so far and to align it to Hart's ladder… When we think of youth engagement, we strive to create opportunities for young people to be in the top rungs of the...
  • Introduction toMy Integrated Student ... - achieve.lausd.net

    Introduction toMy Integrated Student ... - achieve.lausd.net

    The MiSiS system is the evolution of our outdated LAUSD legacy systems with not only an improved look and feel, but also improved reliability. MiSiS is easier to use with new features that will allow PSA Counselors to access important...
  • TYLER OBJECTIVE MODEL - Tim Burry

    TYLER OBJECTIVE MODEL - Tim Burry

    TYLER Curriculum Model Professor Timothy Burry OBJECTIVES Explore the evolution of the Tyler Curriculum Model Describe the model and its major components Define the primary terms that are used Discuss the primary strengths and drawbacks of the model Describe how...
  • Semantics-based Distributed I/O for mpiBLAST P. Balaji, W.

    Semantics-based Distributed I/O for mpiBLAST P. Balaji, W.

    ParaMEDIC uses application-specific plugins to "understand" what the output data means and process it. Output data converted to application-specific metadata, transported, and then converted back. Trades a small amount of additional computation for potentially large benefits in I/O.
  • Heading here - University of Guelph

    Heading here - University of Guelph

    Site Web sur l'AQ de l'AUCC Comme il est nécessaire de diffuser de façon proactive de l'information sur l'approche canadienne en matière d'assurance de la qualité (AQ), l'AUCC a mis sur pied un groupe de travail dont le mandat consiste...
  • Light - Stellenbosch University

    Light - Stellenbosch University

    If the mineral is biaxial, the 2V may also be measured. ... rays vibrate parallel to lines of longitude on the indicatrix. These vibration directions are carried up into the indicatrix Extraordinary (e') rays vibrate along radial lines symmetric about...
  • A Secondary Analysis of the Cross-Sectional Data Available in ...

    A Secondary Analysis of the Cross-Sectional Data Available in ...

    Insert name of presentation on Master Slide. A Secondary Analysis of the Cross-Sectional Data Available in the 'Welsh Health Survey for Children' to Identify Risk Factors Associated with Childhood Obesity in Wales.
  • 2017 Guidelines of the American Thyroid Association for

    2017 Guidelines of the American Thyroid Association for

    In most regions, including the United States, women who are planning pregnancy or currently pregnant, should supplement their diet with a daily oral supplement that contains 150 . μg. of iodine in the form of potassium iodide. This is optimally...