Welcome! Drafting 1309: Basic CAD Andrew Amini Professor

Welcome! Drafting 1309: Basic CAD Andrew Amini Professor Drafting and Design Engineering Technology, HCC Drawing Commands Arc-Allows you to draw an arc using a variety of commands. COMMAND: Arc Center/: Pick a start point or type C (Center) for more options Center/End/ Pick a second point of arc or type C or E (End) for more options End Point: Pick end point of arc OPTIONS: Angle- Enter an arc in terms of degrees or current angular units.

Included Angle: Enters an angle value or use cursor to draw an angle Center: Enter the location of an arcs center point. Enter a coordinate or pick a point. 2 Drawing Commands Direction: Enters a tangent direction from the start point of an arc. Direction from start point: Either enter a relative coordinate or pick a point. End: Enters the end point of an arc. Enter a coordinate or pick a point Length: Enters the length of an arcs chord. Length of Chord: Enter a length or use cursor to drag and pick a length

Radius: Enters an arcs radius Enter a radius or pick a point that defines a radius length Start Point: Enter the beginning point of an arc An Arc can be constructed using the BREAK or TRIM commands, or FILLET for a line 3 Drawing Commands ELLIPSE commands constructs an ellipse Command: ELLIPSE Specify axis endpoint of ellipse or [Arc/Center]: Pick a point or type C for center.

Specify other endpoint of axis: Pick another point Specify distance to other axis or [Rotation] Center- Specify a center point and one end point of each axis. Rotation-Specify the rotation around the major axis. The rotation angle is between 0-89.4 degrees Isocircle- If you enable Ismetric mode, the ELLIPSE prompt will include an isocircle option. Isometric circles will be draw in the current isoplane. You provide the center point and radius or diameter. 4 Editting Commands Break-enables you to erase or split portions of lines, arcs, circles, and polylines COMMAND: BREAK METHOD 1: Select object: Select the line, arc, circle, or

polyline Specify second point or (First Point): Break second point of break METHOD 2: Select object: Select the line, arc, circle or polyline Specify second point or (First Point): Type F Specify first point of break: Pick a point (Use OSNAP) Specify second point: Pick a point 5 Editting Commands Mirror-Mirror commands makes a mirror image copy of an object or a group of objects. You can keep or delete the original objects. Command: Mirror Select Object: Pick the object to be mirrored

Specify first point of the mirror line Specify second point of the mirror line Erase source object? [Yes/No] : Enter Y to delete the objects and N to keep them Tip: If you want the line to be at 90-degree angle, turn ORTHO (F8) to make it easier to set the mirror line. If you want to mirror text (reading from right to left), set Command: MIRRTEXT (0): 1 6 Editing Commands CHPROP- Changes the properties of an object COMMAND: CHPROP Select Objects: Specifies which objects to modify PROPERTIES TO MODIFY: COLOR-Changes the color of the selected objects LAYER- Changes the layer of selected objects

Ltype- Changes the linetype of selected objects Ltscale-Changes the linetype scale factor Lweight-Changes the lineweight of selected objects Thickness-Changes the Z direction of 2D objects Transparency-Changes the transparency level of selected objects. Material-Changes the material of selected objects Annotative-Changes annotative properties Plotsytle-Changes the properties of named plot styles. 7 Editting Commands OFFSET- Offset draws parallel lines, arcs, circles, and polylines. Repeats automatically until cancelled. Command: Offset Specify offset distance or [Through/Erase/Layer]

: (1.0000) Enter a distance value or accept default Select object to offset or [Exit/Undo] : Pick the object Specify point on side to offset or [Exit/Multiple/Undo] : Pick a point or the side Select object to offset or [Exit/Undo] : Pick the object again Specify point on side to offset or [Exit/Multiple/Undo] : Pick a point on the side 8

Recently Viewed Presentations

  • Inclusive Green Economy: Seizing new opportunities to generate

    Inclusive Green Economy: Seizing new opportunities to generate

    In 2009, global GDP reached US $58.22 trillion and yet, almost 80% of humanity continues to live on less than US$ 10/day. The poorest 40 percent of the world's population produce only 5 percent of global income
  • Calculating Daily Particulate Phosphorus Loads From Discreet ...

    Calculating Daily Particulate Phosphorus Loads From Discreet ...

    Particulate phosphorus concentrations are needed to asses the best management practices and revise water quality status. Throughout the environment we can find different types of phosphorus; particulate phosphorus is the particle form of phosphorus.
  • BIO 103 - hbrnsu.weebly.com

    BIO 103 - hbrnsu.weebly.com

    BIOLOGY 1 BIO 103 * LECTURE 01-02 Instructor: HbR Metabolism has two distinct phases-- 1. Anabolism: Building up 2. Catabolism: Breaking down 9. Metabolism * CHARACTERISTICS OF LIVING THINGS There are nine characteristics of living things.
  • FALCON: Boosting Knowledge for Answer Engines

    FALCON: Boosting Knowledge for Answer Engines

    Understanding I Hear and I Forget I See and I Remember I Do and I Understand Attributed to Confucius, ~500 BCE
  • Estudio de seguridad TI en Escuelas de Primaria

    Estudio de seguridad TI en Escuelas de Primaria

    Estudio de seguridad TI en Escuelas de Primaria Panda Security Marzo 2011 Información del estudio Objetivo Conocer y examinar las medidas de seguridad que toman los responsables de TI de las escuelas de primaria así como el top de preocupaciones...
  • PowerPoint Presentation

    PowerPoint Presentation

    - spelling with oi and oy, 3 syllable words, final stable syllable -tion, digraph ue. Students will learn how to use pronouns in their writing and write a historical figure in Black History of their choosing. Please send $3 to...
  • Tissues, Organs & Systems

    Tissues, Organs & Systems

    Pterophytes. Gymnosperms. Angiosperms. Bryophytes. simple plants with waxy cuticle and stomata to reduce water loss and allow gas exchange. most recognizable are the mosses. lack vascular tissue and true leaves, roots or seeds. Pterophytes. Ferns.
  • The Black Swan, the turkey, and the bell

    The Black Swan, the turkey, and the bell

    Turn Black Swans into white swans by. Identifying areas of vulnerability. Addressing areas of vulnerability. Continuously adapting to avoid becoming the turkey. So what can we do as a National Society to be ready for a Black Swan event?