Practical Applications of Strain Gauges

Practical Applications of Strain Gauges

Practical Applications of Strain Gauges c/o Elizabeth Phillips Then & Now: Under Stress This link is about how measuring stress has changed over the years to the present day. These strain gauges are use to measure the amount of stress an

airplane can handle until it fails. Before strain gauges were invented, people would put sand or themselves on the wing until it broke. "As you push up on a wing, our analysis says it ought to deflect a certain amount, so we measure [with strain gauges] the amount it actually deflects," says Mark Jenks. Wings need to be strong in order to fly correctly. Testing the amount of strain a material can take allows engineers to find the strongest material for their planes. This application would best fit into the Civil Engineering Branch The Sopwith Aviation Company id one of the top airplane manufacturing companies in Britain. Then & Now: Under Stress Continued

I didnt know that before there were strain gauges, people used sand to measure the stress level of an airplanes wing. The strain gauge was invented in only 18 years. To me thats a very short time. THEN NOW Smart Bridges

In order to keep bridges in good condition, people have put sensors on bridges to monitor the weak points of a bridge. Many different types of sensors are put on various places on a bridge to get different readings from the bridge. The sensors measure the stress on the bridge so if it becomes abnormal someone can fix the problem. Different sensors measure different things. Photonic sensors measure the strain on bridge cables, thermistors measure the temperature, and vibrating wire strain gauges measure vibrations on the bridge. These sensors tell us if a bridge gets weak at some points so that they can be fixed before the bridge can break. This is most useful to civil engineers. This information would be most useful for bridge maintenance companies

Smart Bridges Continued I found that using sensors on bridges to keep up maintenance was a very smart idea. The Tsing Ma Bridge in Hong Kong has 350 sensors to measure it. Strain Gauges and Rail Forces

Strain gauges are used to keep rails in good condition. These strain gauges are put on the rails in a vertical, longitudinal, and lateral positions to measure different forces. The gauges go on the top, bottom, and sides of the rail. Just like the smart bridges, these sensors are used to maintain good conditions to the rails. The train goes over the rails and trigger the sensors. The data is measured and appropriate action is taken to fix the rails if needed. The gauges are important because it keeps the rail in good condition. This would be used for civil engineering. This information would be useful to railroad maintenance workers.

Strain Gauges and Rail Forces Continued I didnt know it took so many sensors to measure only one side of a rail. Not only do the sensor help people keep the rail in good condition, it helps keep the rails from breaking by eliminates the effects of any lateral bending that could reduce or exaggerate a strain reading taken on only one side of the rail. Wind Tunnels

Wind tunnels are used on cars to measure streamline, measuring air speed, and many other things. The strain gauges are connected to the pipe. They give separate channels of information to provide a range of measurements to include drag, lift and down-force for each wheel. It makes measuring easier for engineers. Wind tunnels can be used for mechanical engineering. Car testers would use this to see problems on a car. Wind tunnels could be used for many things, and you can get

Wind Tunnels continued Wind tunnels could be used for many things. You can get different types of information from a wind tunnel depending on how you use it. Vehicle Classifications using Strain Gauge

Students in the University of California are trying to identify what type of car is driving on the road using only a strain gauge. The strain gauges are installed in a bridge deck to measure how much strain is put on the sensor. A car will drive over the gauge and apply strain. The more strain that is put on the sensor, the bigger the vehicle. The purpose of the sensor is to find a pattern of what types of areas use what cars to classify them, to monitor traffic in different areas, and protect the privacy of transportation users. Engineers who work with cars like mechanical engineers would fit this experiment best. This information could be useful to many people such as road companies and companies that provide toll booths.

Vehicle Classifications using Strain Gauge Continued I think the overall concept of this experiment is amazing. I like out it (the experiment) is used for many different things and not just one concept. I also think its interesting that every vehicle makes a different type of strain signal. Dynos

A strain gauge is attached to a dyno in order to measure torque on an engine. A dyno is connected to a flywheel or crankshaft and a strain gauge is attached to the frame of the dyno to measure the torque. When the engine starts, the strain gauge measures the spinning wheel and converts it to torque. The strain gauge makes it much easier to measure torque. This is most useful to mechanical engineering branch. Automotive companies could use this information to find out more about their cars.

Dynos Continued 2 interesting things about dynos are 1. being able to use several devices to achieve one certain measurement and 2. finding out that strain gauges for many different things. Order Of Favorites 1. 2. 3. 4. 5. 6. Smart Bridges

Auto Classifications Then & Now: Under Stress Wind Tunnels Rail forces Dynos The smart bridges article was my favorite way of using a strain gauge because it showed how a strain gauge can be used in a very important way and it stated that very clearly.

Recently Viewed Presentations

  • The Importance of Biodiversity (biodiversity = the number of ...

    The Importance of Biodiversity (biodiversity = the number of ...

    The Importance of Biodiversity(biodiversity = the number of different species living together in a community or ecosystem). Think of any of the topics we have discussed so far. Come up with as many reasons as you can as to the...
  • Computer Security: Principles and Practice, 1/e

    Computer Security: Principles and Practice, 1/e

    Unfortunately, due to the design of operating systems, and the need to restrict access to underlying system resources, there are circumstances when such access must be granted. Classic examples include the programs used to allow a user to login or...
  • Recommended Du`as in Ramadan - 4

    Recommended Du`as in Ramadan - 4

    O Alláh, relieve us of our debts, and help us against poverty. Surely You have power over all things. Prepared by Tablígh Sub-Committee of ISIJ of Toronto and updated by SICM (Mahfil Ali) Recommended Du'ás in Rama_án * * Prepared...
  • 18 - G-w

    18 - G-w

    Place concrete forms. Perform finishing operations, including screeding, edging and jointing, floating, brooming, and form removal. Describe three basic types of joints used in concrete construction.
  • MYP Chemistry Covalent Bonding and Compounds International College

    MYP Chemistry Covalent Bonding and Compounds International College

    Graphite Diamond Silicon dioxide Covalent summary Shared electron pairs Full outer shells Molecules Non-conductors (exception graphite) Two types - simple and giant Simple covalent substances v. low mp Giant covalent substances v. high mp Covalent Bonds Covalent bonding is the...
  • Land Use in America  Dominated by Animal Ag

    Land Use in America Dominated by Animal Ag

    Mapping Runoff Back to the Company Source. Strategic reason for focusing here: Agriculture sits at nexus of all our most pressing environmental, and social issues- biodiversity loss, climate change, water pollution and scarcity, food security, and poverty (hunger/land tenure/subsistance agriculture)
  • Fingerprints - Westerville City School District

    Fingerprints - Westerville City School District

    Fingerprints What is a Fingerprint? The skin on the palms of our hands and the soles of our feet is covered with FRICTION RIDGES. These ridges allow us to pick up and handle objects easily No two people (not even...
  • Lecture 27: FRI 20 MAR - LSU

    Lecture 27: FRI 20 MAR - LSU

    Physical optics (light waves) Energy Density in E and B Fields Oscillators are very useful in practical applications, for instance, to keep time, or to focus energy in a system. All oscillators can store energy in more than one way...