FLORIDA ELEVATOR ASSOCIATION Alteration/Modernization Inspection Criteria by: John

FLORIDA ELEVATOR ASSOCIATION Alteration/Modernization Inspection Criteria by: John

FLORIDA ELEVATOR ASSOCIATION Alteration/Modernization Inspection Criteria by: John S. Rearick CodeDataPlate.com 1/11/11 4/17/2010 www.CodeDataPlate.com 1 1 Disclaimer The opinions and recommendations presented here are strictly my own and are not those of ASME, IAEC, NAESAI or any organization of which I may be a member. All references to the Code are from A17.1a-2005 Copyright 2004 by the American Society of Mechanical Engineers. JSRearick 1/11/11 www.CodeDataPlate.com 2 From Code Data Plate to

Acceptance Inspection Tag Electric Elevator - Acceptance Test Tag DO NOT REMOVE CODE DATA PLATE INSTALLATION CODE: ALTERATION CODE: ASA A17.1-1965 ASME A17.1-2000 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.11.5, 8.7.2.13, 8.7.3.8, 8.7.3.12, 8.7.3.23.7, 8.7.3.24, 8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8 8.7.3.29, codedataplate.com CODE DATA PLATE INSTALLATION CODE: ANSI A17.1b-1980 ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.2.8, 8.7.2.11.1, 8.7.2.12, 8.7.2.14.1, 8.7.2.19,

8.7.2.20, 8.7.2.27.4, 8.7.2.28 codedataplate.com 1/11/11 Person or Firm Performing Test: Date: Witnessed by: QEI # REQ. # 8.10.2.2.1(h) 8.10.2.2.1(i) 8.10.2.2.1(j)(1) 8.10.2.2.1(j)(2) 8.10.2.2.1(j)(3) 8.10.2.2.1(q) 8.10.2.2.2(v) 8.10.2.2.2(y)(3) 8.10.2.2.2(y)(6) 8.10.2.2.2(cc)(a) 8.10.2.2.2(cc)(3) 8.10.2.2.2(ff) 8.10.2.2.2(hh) 8.10.2.2.2(ii) 8.10.2.2.2(ii)(2) 8.10.2.2.2(ii)

8.10.2.2.2(ii)(2) 8.10.2.2.2(jj)(1) 8.10.2.2.2(jj)(2) 8.10.2.2.2(mm) 8.10.2.2.3(d) 8.10.2.2.3(ff) 8.10.2.2.5(c) 8.10.2.2.5(c) 8.10.2.2.5(l) 8.10.2.2.6 Devices Tested/ Test Door Closing Force Test Door Closing Time Test Door Opening Leveling Zone and Speed Inner Landing Zone Emergency / Standby Power Test Braking System Test Winding Drum Machines Slack Rope W.D. Mach. Final Terminal Stopping Emergency Stop Traction Limit Terminal Stopping Devices Test Governors Overspeed Test Car Safety Test Car Safety Type A inertia app. Test Counterweight Safety Test Cwt Safety Type A inertia app. Test Ascending Car OS Protection Test

Unintended Car Movement Test Emergency Brake Top Car Clearance / Refuge Space Unexpected Car Movem. (top-of-car) Car Oil Buffer Test Counterweight Oil Buffer Test Unexpected Car Movement (pit) Firefighters Emergency Operation Results of Tests 3 From Code Data Plate to Acceptance Inspection Tag Scope of a Modernization What is Retained What is New What is Altered Scope of Acceptance Inspection What was Retained What was New What was Altered 1/11/11 4 Scope of Alteration

Start With This 1/11/11 Courtesy of Bill Synder 5 Scope of Alteration Destination Dispatch EcoSpace / MonoSpace End With This Compass Destination Entry MRL Gen 2 Synergy Synchron Hoisting Machine 1/11/11 ? Courtesy of Bill Synder 6

Scope of Modernization or Alteration Entrance and Door Work Cab Work Shaft or Hoistway Work Motor or Machine Room Work Changes in Speed, Rise/Travel or Capacity Changes in Operation or Use 1/11/11 7 Scope of Alteration Retained Equipment Hoistway, Rails, Counterweight Buffers and Other Pit Equipment Platform, Safeties and Governor New Equipment Controls Door & Cab Equipment Rope Brake

Altered Equipment Machine 1/11/11 8 Harmonization A17.1b-1998 (25 Parts) A17.1a-2005 (9 Parts) Introduction (Scope & Definitions) Part 1 & Part 2 ( HW & Traction) Part 3 (Hydraulic Elevators) Parts 6, 16 and 18 (Hand, R&P, SC) Parts 4, 5, 15, 17, 19, 22, 23 and 25 Parts 8 and 9 (Esc. & MW) Parts 7 and 14 (DW & ML)

Parts 10, 11, 12 and 13 (Insp, Alts, etc) Introduction (Reference Codes) Appendices Parts 20 and 21 (Chair & Platform Lifts) 1/11/11 Part 1 (General) Part 2 (Electric) Part 3 (Hydraulic) Part 4 (Other Mach.) Part 5 (Special App.) Part 6 (Esc. & MW) Part 7 (DW & ML) Part 8 (General Req.) Part 9 (Reference) Appendices A18.1-2005

9 A17.1-2004 Code Organization Part 1 - Scope, Purpose and Definitions Part 2 - Electric Elevators Part 3 - Hydraulic Elevators Part 4 - Other Types of Machines Part 5 - Special Applications Part 6 - Escalators & Moving Walks Part 7 - Dumbwaiters & Material Lifts Part 8 - General Requirements Section 8.7 Alterations Section 8.10 Acceptance Inspections 1/11/11 10 A17.1 Code Organization

Part 9 - Referenced Documents Figures Tables Non-Mandatory Appendices Index 1/11/11 11 Parts 1 & 2 Part 1 Scope, Purpose & Definitions Part 2 requirements: 1/11/11

2.1/2 Hoistways & Pits 2.3 Guarding of Cwt. 2.4/5 Clearances 2.6 Under Hoistway 2.7/10 Machinery 2.11/13 Doors 2.14/16 Cars 2.17 Safeties 2.18 Governors 2.19 ACOS/UIM 2.20 Ropes 2.21 Counterweights 2.22 Buffers 2.23 Rails 2.24 Machines 2.25 Limits 2.26 Controls

2.27 Emerg. Oper. & F/S 2.28/9 Drawings & Ident. 12 Parts 3 through 8 Part 3 Hydraulic Part 4 Rack & Pinion, Screw Column, Hand Part 5 Special App. LULA Residence Sidewalk Part 6 Escalators Part 7 Dumbwaiters 1/11/11 Part 8 General 8.1 Security 8.4/5 Seismic 8.6 Maintenance, Repair, Replacement and Testing (in08) 8.7 Alterations 8.8 Welding 8.9 Code Data Plate 8.10 Acceptance Inspections (new and

alterations 8.11 Periodic Inspections 13 Parts 9 and Appendices Part 9 References Nonmandatory Appendices (A - R) A=Control System B=Door Landing and Unlocking Zones F=ACOS/UIM J=Relationship of Pit Ladder to Hoistway Door Unlocking Means 1/11/11 L=Index of Alteration Requirements N=Recommended Inspection and Test Intervals in Months Q=Explanatory Figures for the Definitions of Elevator Machinery Space, etc R=Inspection

Operation and Hoistway Access Switch Operation Hierarchy Index 14 1/11/11 www.CodeDataPlate.com 15 8.9 Code Data Plate Guide to Acceptance Inspection Guide to Periodic Inspections Original Installation Code Alteration Code Section 8.7 Requirements complied with Appendix L is Guide to 8.7 Requirements

1/11/11 16 8.9 Code Data Plate Door Operator Plunger Gripper CODE DATA PLATE Wiring INSTALLATION CODE: Re-opening Devise Door Restrictor ALTERATION CODE: ASA A17.1-1965 Valve ASME A17.1-2000 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.11.5, 8.7.2.13, 8.7.3.8, 8.7.3.12, 8.7.3.23.7, 8.7.3.24,

8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8 Tank 8.7.3.29, codedataplate.com Limits Controller Replacement Top of Car Insp.. Emergency Operations Leveling 1/11/11 www.CodeDataPlate.com 17 SECTION 8.7 ALTERATIONS 1/11/11 18 CODE DATA PLATE INSTALLATION CODE: ANSI A17.1b-1980 ALTERATION CODE:

ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com Entrance and Door Work Cab Work Hoistway Work - Wiring Machine Room Work Rope Gripper, New Motor, Controls and Fire Service 1/11/11 23 Hoistway Work ALTERATION CODE: ASME A17.1a-2002 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com

8.7.2.1 Hoistway Enclosures 8.7.2.2 Pits 8.7.2.3 through 8.7.2.6 H/W Cwt. Items 8.7.2.7 Machine Room 8.7.2.8 Wiring 1/11/11 24 Hoistway Work Typical Items and What gets Dragged in 8.7.3.2 Pits {1203.1f} Alterations made to the pit shall conform to 2.1.2.3 - Strength of Pit Floor All of Section 2.2 - Pits See also 8.7.3.4 - Vertical Car and Counterweight Clearances and Runbys Note: Often Pit Alterations are required when a Jack is replaced. Red is rule in 1996/7/8 code. Black is current in 2004/5 1/11/11 25

Hoistway Work Typical Items and What gets Dragged in 8.7.2.1.5 Control of Smoke and Hot Gases {1201.1e} (Hoistway Ventilation) shall conform to: 2.1.4 Control of Smoke and Hot Gases When required by the building code, hoistways shall be provided with means to prevent the accumulation of smoke and hot gases. Where air pressurization of the hoistway is utilized as a means of smoke and hot gas control, the air shall not be introduced into the hoistway in such a manner as to cause erratic operation by impingement of traveling cables, selector tapes, governor ropes, compensating ropes, and other components sensitive to excessive movement or deflection. 1/11/11 26 Hoistway and Machine Room Work Typical items and what else gets dragged in 8.7.2.8 or 8.7.3.8 Wiring {1201.3 or 1203.1c} Electrical Equipment, Wiring, Pipes, and Ducts in Hoistways and Machine Rooms. The installation of any new, or the alteration of existing, electrical equipment, wiring, raceways, cables, pipes, or ducts shall conform to the applicable requirements of

2.8 (shall conform to NFPA 70) Red is rule in 1996/7/8 code. Black is current in 2004/5 1/11/11 27 Door Specifications ALTERATION CODE: ASME A17.1a-2002 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com 8.7.2.10 - Entrances 8.7.2.11 - Hoistway Door Locking Devices Interlocks Door Restrictors 8.7.2.12 - Door Operators 8.7.2.13 - Reopening Devises 1/11/11 28 What gets Dragged in Replace H/W Door Tracks & Hangers

8.7.2.10.1 & 8.7.2.10.2 {1201.10a & 1201.10b} 8.7.2.10.1(c) Where an alteration is made to any hoistway entrance, it shall conform to 2.11.3, 2.11.5, 2.11.7, 2.11.8, and 8.7.2.10.5. The entire installation shall also conform to 2.12 and 2.13. 8.7.2.10.2(b) Hanger tracks and track supports shall conform to 2.11.11.2. 8.7.2.10.2(d) Hangers shall conform to 2.11.11.4. 9 Requirements 1/11/11 29 What gets Dragged in Replace H/W Door Tracks & Hangers Shall conform to: 2.11.3 Closing of Hoistway Doors 2.11.5 Projection of Entrances and Other Equipment Beyond the Landing Sills 2.11.7 Glass in Hoistway Doors 2.11.8 Weights for Closing or Balancing Doors 8.7.2.10.5 Marking of Entrance Assemblies 2.12 Hoistway Door Locking Devices and Electric Contacts, and Hoistway Access Switches 2.13 Power Operation of Hoistway Doors and Car Doors 2.11.11.2 Hangers, Tracks, and Track Supports 2.11.11.4 Hangers 1/11/11

30 What gets Dragged in Replace H/W Door Tracks & Hangers 2.11.11.2 Hangers, Tracks, and Track Supports Hangers, tracks, and their supports and fastenings for doors shall be constructed to withstand, without damage or appreciable deflection, an imposed static load equal to four times the weight of each panel as applied successively downward and upward at the vertical centerline of the panel. (See 2.11.11.5.7 and 2.11.11.5.8.) 1/11/11 31 What gets Dragged in Replace H/W Door Tracks & Hangers 2.11.11.4 Hangers. Hangers shall conform to 2.11.11.4.1 Means shall be provided to prevent the hangers from jumping the track. 2.11.11.4.2 Stops shall be provided in the entrance assembly to prevent hangers from overrunning the end of the track. 1/11/11 32

Door Specifications ALTERATION CODE: ASME A17.1a-2002 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com 8.7.2.10 - Entrances 8.7.2.11 - Hoistway Door Locking Devices Interlocks Door Restrictors 8.7.2.12 - Door Operators 8.7.2.13 - Reopening Devises 1/11/11 33 What gets Dragged in Replace Interlocks & Install Restrictor 8.7.2.11.1 {1201.11a} Interlocks. Where the alteration consists of the installation of hoistway door interlocks, the installation shall conform to 2.12.1, 2.12.2, 2.12.4 through 2.12.7, and 2.24.8.3.

8.7.2.11.5 Restricted Opening of Hoistway Doors or Car Doors of Passenger Elevators. Where a device that restricts the opening of hoistway doors or car doors is altered or installed, the device shall conform to 2.12.5. 1/11/11 34 What gets Dragged in Replace Interlocks Shall conform to: Hoistway Door Locking Devices Requirements 2.12.1, 2.12.2, 2.12.4 through 2.12.7, and 2.24.8.3 - Driving-Machine Brake Install Restrictor Shall conform to: Hoistway Door Locking Device Requirement 2.12.5 1/11/11 35 Door Specifications ALTERATION CODE: ASME A17.1a-2002

SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com 8.7.2.10 - Entrances 8.7.2.11 - Hoistway Door Locking Devices Interlocks Door Restrictors 8.7.2.12 - Door Operators 8.7.2.13 - Reopening Devises 1/11/11 36 What gets Dragged in Replace Door Operator 8.7.2.12 {1201.12} Power Operation of Hoistway Doors. Where the alteration consists of the addition of, or alteration to, power opening or power closing of hoistway doors, the installation shall conform to 8.7.2.10.1, 8.7.2.10.2,8.7.2.10.3, and 8.7.2.10.5. Note: This doesnt take you right to 2.13 1/11/11 37

What gets Dragged in Power Operation of Hoistway Doors Shall conform to: Entrances and Hoistway Openings 8.7.2.10.1> 8.7.2.10.1(c) Where an alteration is made to any hoistway entrance, it shall conform to 2.11.3, 2.11.5, 2.11.7, 2.11.8, and 8.7.2.10.5. The entire installation shall also conform to 2.12 and 2.13. 8.7.2.10.2 Horizontal Slide-Type Entrances 8.7.2.10.3 Vertical Slide-Type Entrances 8.7.2.10.5 Marking of Entrance Assemblies 1/11/11 38 Door Specifications ALTERATION CODE: ASME A17.1a-2002 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com

8.7.2.10 - Entrances 8.7.2.11 - Hoistway Door Locking Devices Interlocks Door Restrictors 8.7.2.12 - Door Operators 8.7.2.13 - Reopening Devises 1/11/11 39 What gets Dragged in Replace Door Reopening Device 8.7.2.13 {1200.5d} Door Reopening Device. Where a reopening device for power-operated car doors or gates is altered or added, the following requirements shall apply: (a) requirement 2.13.4 Closing Limitations (b) requirement 2.13.5 Reopening Device Requirements (c) when firefighters emergency operation is provided, door reopening devices and door closing on Phase I and Phase II shall comply with the requirements applicable at the time of installation of the firefighters emergency operation. 1/11/11 40

What gets Dragged in Door Reopening Device Shall conform to: 2.13.4 Closing Limitations 2.13.4.1 Where Required 2.13.4.2 Closing Mechanism 2.13.4.2.1 Kinetic Energy 2.13.4.2.2 Door Travel in the Code Zone Distance 2.13.4.2.3 Door Force 2.13.4.2.4 Data Plate DOOR OPERATOR DATA PLATE 1/11/11 NORMAL Seconds REDUCED Seconds cdp

41 Cab Work ALTERATION CODE: ASME A17.1a-2002 SECT. 8.7 REQUIREMENTS COMPLIED WITH: #REF! 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.25.1(b), 8.7.2.26, 8.7.2.27.1 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com 8.7.2.14 - Car Enclosures 8.7.2.14.1 New Cab 8.7.2.14.2 - Cab Alteration 8.7.2.14.3 Cab Interiors - USA 8.7.2.14.4 Cab Interiors - Canada 1/11/11 42 Cab Work 8.7.2.14 - Car Enclosures 8.7.2.14.1 New Cab the installation shall conform to 2.14, 2.15, and 2.17

8.7.2.14.2 Cab Alteration (a) through (h) Shell, Lights, Fan, Exits, etc. 8.7.2.14.3 Cab Interiors USA (a) through (e) Panels and Flooring required to meet ASTM E 84, UL 723, or NFPA 255: (1) flame spread rating of 0 to 25 (2) smoke development of 0 to 450 1/11/11 43 Cab Work ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.1.2 (2.14.1.7 Car Top Railing) 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com 8.7.1.2 (2.14.1.7 Car Top Railing) 2.14.1.7 Railing and Equipment on Top of Cars 2.14.1.7.1 A standard railing conforming to 2.10.2 shall be provided on the outside ...

TN-10-791 (look for this in the next edition) 8.7.2.14.5 Addition of Car Top Railing 1/11/11 Where a car top railing is installed, the installation shall conform to 2.14.1.7. Where conformance to 2.14.1.7 is not possible due to existing overhead conditions, an alternative solution providing equivalency to 2.14.1.7 shall be permitted. 44 MACHINES & CONTROLS While we are heading for the Machine Room pick-up the Pocket Guide to Alterations and a sample Plate. 1/11/11 45 Code Data Plate (8.6.1.5) Alteration Pocket Guide 8.7.1 General Requirements TRACTION HYDRO 8.7.2 8.7.3 8.7.2.1

Hoistway 8.7.3.1 8.7.2.2 Pits 8.7.3.2 8.7.2.7 Machine room 8.7.3.7 8.7.2.8 Wiring 8.7.3.8 8.7.2.10 Entrances 8.7.3.10 8.7.2.10.1 General <<<< 8.7.2.10.2 Horizontal Slide <<<< 8.7.2.10.3 Vertical Slide <<<< 8.7.2.10.4 Swing Type <<<< 8.7.2.11 Hoistway Door 8.7.3.11 8.7.2.11.1 Interlocks <<<< 8.7.2.11.4 Access Sw. (App. R) <<<< 8.7.2.11.5 Door Restrictor

<<<< 8.7.2.12 Operators 8.7.3.12 8.7.2.13 Re-opening Device <<<< 8.7.2.14 Cabs 8.7.3.13 8.7.2.14.1 New Cab <<<< 8.7.2.14.2 Cab Alt. Except panels <<<< 8.7.2.14.3 Cab Alt. Interiors only <<<< 8.7.2.14.5 Remove Stop Switch (before b-2003) 8.7.2.15 Frame, Plat. & Guides 8.7.3.14 8.7.2.16 Load and Class 8.7.2.16.1 Type of Service 8.7.3.17 8.7.2.16.2 Class of Loading 8.7.3.18 8.7.2.16.3 Pass on Freight 8.7.3.19 8.7.2.16.4 Increase Rated Load 8.7.3.20

8.7.2.17 Travel or Speed 8.7.3.22 8.7.2.18 Safeties 8.7.3.15 For complete list see A17.1 Sect. 8.7 & App. L 1/11/11 TRACTION 8.7.2.19 8.7.2.20 HYDRO 8.7.3.16 Governor Rope Brake, etc. Hydraulic Jack 8.7.3.23.1 Hydraulic Cylinder only 8.7.3.23.3 Move Power Unit 8.7.3.23.6 Plunger Gripper 8.7.3.23.7 Valve & Piping 8.7.3.24 8.7.2.21

Ropes 8.7.3.25 8.7.2.22 Counterweights 8.7.3.26 8.7.2.22.3 Cwt. Guides <<<< 8.7.2.23 Buffers 8.7.3.27 8.7.2.24 Rails 8.7.3.28 Tank 8.7.3.29 8.7.2.25 Machines 8.7.2.26 Terminal Stopping 8.7.3.30 8.7.2.27 Control Equipment 8.7.3.31 8.7.2.27.1 Top of Car 8.7.3.31.1 8.7.2.27.2 Leveling 8.7.3.31.2 Anti-Creep 8.7.3.31.3 8.7.2.27.3 Power Supply

8.7.3.31.4 8.7.2.27.4 Controller 8.7.3.31.5 8.7.2.27.5 Type of Motion 8.7.3.31.6 8.7.2.27.6 Type of Operation 8.7.3.31.7 Emergency Lowering 8.7.3.31.9 8.7.2.27.7 Remove Stop Switch* 8.7.3.31.10 8.7.2.28 Emerg. Operations 8.7.3.31.8 8.7.4 Other Driving Machines 8.7.5 Special Applications 8.7.6 Escalators & MW 8.7.7 Dumbwaiters & ML *A17.1b-2003 and later editions only www.CodeDataPlate.com CodeDataPlate.com 281/257-0516 46

Machine Room Work ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com Rope Brake 8.7.2.20 Ascending Car Overspeed and Unintended Car Movement Protection The requirements of 2.19 shall be conformed to where a device for protection against ascending car overspeed and unintended car movement is altered or installed. 1/11/11 47 Machine Room Work ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ###

8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com Replace DC motor with AC Motor 8.7.2.25.1 Alterations to Driving Machines and Sheaves 8.7.2.25.1(a) New Machine 8.7.2.25.1(b) Alterations to Machine 8.7.2.25.1(c) Alteration to Sheave 1/11/11 48 Machine Room Work ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com Control Items 8.7.2.27.1 Top-of-Car Operating Device 8.7.2.27.2 Car Leveling Device 8.7.2.27.5 Change in Type of Motion Control 8.7.2.28 Emergency Operations

and Signaling Devices 1/11/11 49 Other Control Changes ALTERATION CODE: ASME A17.1b-2003 SECT. 8.7 REQUIREMENTS COMPLIED WITH: ### 8.7.2.8, 8.7.2.10.2, 8.7.2.11.1, 8.7.2.11.5, 8.7.2.12, 8.7.2.14.3, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com Controllers 8.7.2.27.3 Change in Power Supply 8.7.2.27.4 Replace Control 8.7.2.27.5 Change in Type of Motion Control 8.7.2.27.6 Change in Operation Control 1/11/11 50 Control Changes Power Supply to controller is altered in type, phase or voltage (not a new Main Line) Controller is replaced without a change to

Motion or Operation Control (and this could be a change from relay to microprocessor) Type of Motion - such as MG to SSD or VVVF Type of Operation Car Switch to Automatic, Simplex to Duplex or Group Note: These 4 requirements are often mixed up. 1/11/11 www.CodeDataPlate.com 51 Control Changes 8.7.2.28 Emergency Operations Emergency Signaling Devices Emergency or Standby Power Firefighters Service 8.7.3.31.8 Emergency Operations (a) Emergency Signaling Devices (b) Emergency or Standby Power (c) Firefighters Service Note: Hydro control change may not require change to fire service. 1/11/11

www.CodeDataPlate.com 52 What gets Dragged in Replacement of a controller 8.7.2.27.4 No change in type of motion control 2.25 2.26.1.4 & 2.26.1.5 2.26.4 thru 2.26.9 2.27.2 thru 2.27.8 2.26.4.1 & 2.26.4.2 1/11/11 Change in type of motion control Where a controller for the operation of hoistway doors, car doors,- or car gatesorisStandby installed as part of 2.27.2 Emergency Power System

Terminal Stopping an alteration, 2.26.4 - Electrical allDevices Equipment and modified and Wiring equipment and 2.27.3 -new Firefighters Emergency Operation: Normal Terminal Stopping 2.26.5 - System toElevators Monitor and Prevent Automatic wiring shall conform toDevices

2.26.4.1 and 2.26.4.2 Automatic FinalOperation Terminal Stopping Devices Inspection Operation of the Elevator With Faulty Door Contact 2.27.4 Firefighters Emergency Operation: Location Emergency CircuitsTerminal Stopping Device NonAutomatic Elevators Switch Emergency Terminal Speed-Limiting Device 2.26.6 for Transferring

Control ofand theWiring Elevator -Electrical Phase Protection of Motors 2.26.4 Equipment 2.27.5 Devices Automatic Elevators the to Operating 2.26.7 - Installation of Capacitors or With OtherDesignatedDevices to attendant Operation 2.26.4.1 All electrical equipment and

wiring Continuous Pressure Type Devices Ineffective shall Where Required and Function Make Electrical Protective conform to NFPA70 or CSA-C22.1, whichever is Maximum 2.27.6 2.26.8 Speed 0.75 (150 Ft/Min) - Firefighters Emergency Operation: - Release andM/S Application

of Driving-Machine Location applicable. Used Only by Elevator Personnel Inspection Operation Brakes 2.26.9 Inspection With OpenEmergency Door Circuits Operation - Control and Operating Circuits 2.27.7 - Firefighters Operation: 2.26.4.2 Electrical equipment shall be listed/certified Operating Procedures

and labeled/marked. 2.27.8 - Switch Keys 53 Courtesy of Bill Synder Control Changes Replacement of a controller No change in type of motion control What is a change in the type of motion control? Motion control: that portion of a control system that governs the acceleration, speed, retardation, and stopping of the moving member. 1/11/11 Courtesy of Bill Synder 54 Types of Traction Motion Control 8.7.2.27.5 AC motor control: control, AC motor, DC injection control, single speed AC control, two speed AC control, variable voltage, variable frequency (VVVF)

control, variable voltage AC (VVAC) DC motor control: control, dual bridge thyristor converter control, generator field control, multivoltage control, rheostatic control, single bridge thyristor converter 1/11/11 Courtesy of Bill Synder 55 Work in Progress A17.1-201X 1/11/11 Courtesy of Rob Kramer 56 Work in Progress A17.1-201X 1/11/11 Courtesy of Rob Kramer 57

Control Changes Replacement of a controller No change in type of motion control Change in type of motion control Now we will replace the controller and change the type of motion control. Replace the Motor Generator with Static Drive. 1/11/11 Courtesy of Bill Synder 58 Control Changes Replacement of a controller 2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the installation shall conform to the following: (a) The protection of the hoistway landing openings shall conform to 2.11.1 through 2.11.13, 2.12, and 2.13.

1/11/11 Courtesy of Bill Synder 59 Control Changes Replacement of a controller 2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the installation shall conform to the following: (b) Car enclosures and car doors or gates shall conform to 2.14, except that where existing car enclosures and/or car doors or gates are retained, conformance with the following requirements is not required: (1) requirements 2.14.1.3, 2.14.1.5.1, and 2.14.1.8 (2) requirements 2.14.2.1, 2.14.2.3, and 2.14.2.4 (3) requirement 2.14.3 (4) requirements 2.14.4.3 and 2.14.4.6 1/11/11 Courtesy of Bill Synder 60 Control Changes Replacement of a controller

2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the installation shall conform to the following: (c) The car safety, the counterweight safety (where provided), and the governor shall conform to 2.17 and 2.18, except that the pitch diameter of speed governor sheaves and governor tension sheaves are not required to conform to 2.18.7. (d) The capacity and loading shall conform to 2.16. (e) The terminal stopping devices shall conform to 2.25. 1/11/11 Courtesy of Bill Synder 61 Control Changes Replacement of a controller 2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the installation shall conform to the following: (f) The operating devices and control equipment shall conform to 2.26. The requirements of 2.26.4.2, 2.26.4.3, and 2.26.4.4 shall not apply to electrical equipment unchanged by the alteration. 1/11/11

Courtesy of Bill Synder 62 Control Changes Replacement of a controller 2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the installation shall conform to the following: (g) In jurisdictions not enforcing NBCC, emergency operation and signaling devices shall be provided and shall conform to 2.27. In jurisdictions enforcing NBCC, emergency operation and signaling devices where required by NBCC shall be provided and shall conform to 2.27. 1/11/11 Courtesy of Bill Synder 63 Control Changes Replacement of a controller 2.7.2.27.5 Change in type of motion control Where there is a change in the type of motion control, the

installation shall conform to the following: (h) Car overspeed protection and unintended movement protection shall conform to 2.19. What about the platform guard? 2.15.9.2 The guard plate shall have a straight vertical face, extending below the floor surface of the platform, conforming to one of the following: (a) where the elevator is required to conform to 2.19.2.2(b) the depth of the truck zone, where provided, plus 75 mm (3 in.), but in no case less than 1 220 mm (48 in.) 1/11/11 Courtesy of Bill Synder 64 Control Changes Replacement of a controller All we had to do was to read what the code requires. 2.7.2.27.5 Change in type of motion control Did we forget about anything? 1/11/11 Courtesy of Bill Synder

65 Alteration Acceptance Inspection 8.10.2.3 Alterations to Electric Elevators 8.10.3.3 Alterations to Hydraulic Elevators Also note: 8.10.1 - General 8.10.2 - Electric 8.10.3 - Hydraulic 8.10.4 - Escalators 8.10.5 - Other Equipment 1/11/11 Electric Elevator - Acceptance Test Tag DO NOT REMOVE Person or Firm Performing Test: Date: Witnessed by: QEI #

REQ. # 8.10.2.2.1(h) 8.10.2.2.1(i) 8.10.2.2.1(j)(1) 8.10.2.2.1(j)(2) 8.10.2.2.1(j)(3) 8.10.2.2.1(q) 8.10.2.2.2(v) 8.10.2.2.2(y)(3) 8.10.2.2.2(y)(6) 8.10.2.2.2(cc)(a) 8.10.2.2.2(cc)(3) 8.10.2.2.2(ff) 8.10.2.2.2(hh) 8.10.2.2.2(ii) 8.10.2.2.2(ii)(2) 8.10.2.2.2(ii) 8.10.2.2.2(ii)(2) 8.10.2.2.2(jj)(1) 8.10.2.2.2(jj)(2) 8.10.2.2.2(mm) 8.10.2.2.3(d) 8.10.2.2.3(ff) 8.10.2.2.5(c) 8.10.2.2.5(c) 8.10.2.2.5(l) 8.10.2.2.6 Devices Tested/ Test Door Closing Force Test

Door Closing Time Test Door Opening Leveling Zone and Speed Inner Landing Zone Emergency / Standby Power Test Braking System Test Winding Drum Machines Slack Rope W.D. Mach. Final Terminal Stopping Emergency Stop Traction Limit Terminal Stopping Devices Test Governors Overspeed Test Car Safety Test Car Safety Type A inertia app. Test Counterweight Safety Test Cwt Safety Type A inertia app. Test Ascending Car OS Protection Test Unintended Car Movement Test Emergency Brake Top Car Clearance / Refuge Space Unexpected Car Movem. (top-of-car) Car Oil Buffer Test Counterweight Oil Buffer Test Unexpected Car Movement (pit) Firefighters Emergency Operation Results of Tests 66

8.10 Required Tests 8.10.1.2 Applicability of Inspection and Test Requirements. Inspections and tests required by 8.10.2 through 8.10.5 are to determine that the equipment conforms with the following applicable requirements: (a) the Code at the time of installation (b) the Code effective as applicable to and for each alteration (c) the ASME A17.3 Code if adopted by the authority having jurisdiction Do these words look familiar? 1/11/11 67 8.10 Required Alteration Tests Traction - 8.10.2.3 Hydro - 8.10.3.3 8.10.2.3.1 Alterations shall be inspected for compliance with the applicable requirements specified in 8.7. Check code data plate for compliance with

8.7.1.8 Under A17.1-1996 this was Rule 1003.3 Also see 8.10.2.1 for items not covered by 8.10.2.3.1 1/11/11 8.10.3.3.1 Alterations shall be inspected for compliance with the applicable requirements specified in 8.7.Check code data plate for compliance with 8.7.1.8. Under A17.1-1996 this was Rule 1006.3 Also see 8.10.3.1 for items not covered by 8.10.3.3.1 69 8.10 Required Alteration Tests Door Operator 1/11/11 70

8.10 Required Alteration Tests for Alteration to Door Operator Hydro - 8.10.3.3.2 {1006.3} (a) Where the alteration consists of the addition of power operation to the door system (8.7.3.12 {1203.1m}), tests shall be performed as specified in 8.10.3.2.1(a), (h), (i), (j), and (t); 8.10.3.2.3(g); 8.10.3.2.3(r); 8.10.2.2.4(b), (d) through (g); and 8.10.2.2.6.{1002.2h see Item 1.10 in A17.2} Red is rule in 1996/7/8 code. Black is current in 2004/5 1/11/11 71 8.10 Required Alteration Tests for Alteration to Door Operator Traction - 8.10.2.3.2 {1003.3} (a) Where the alteration consists of the addition of power operation to the door system (see 8.7.2.12 {1201.12}), tests shall be performed as specified in 8.10.2.2.1(h), (i), (j), and (t); 8.10.2.2.3(c)(3); 8.10.2.2.3(j) and (w); 8.10.2.2.4(b), and (d) through (g); and 8.10.2.2.6. {1002.2h Power Operation }

And what happened to (a) Door Reopening Device (2.13.5) (Item 1.1)? 1/11/11 72 8.10 Required Alteration Tests for Alteration to Door Operator Traction - 8.10.2.3.2 (a) Power operation to the door system tests: 8.10.2.2.1(h) Door Closing Force Test (in 96) 8.10.2.2.1(i) Door Closing Time Test 8.10.2.2.1(j) Door Opening & Zone Tests 8.10.2.2.1(t) - Door Monitoring Systems 8.10.2.2.3(c)(3) Inspection Operation with open door circuits 8.10.2.2.3(j) - Car Leveling Devices 8.10.2.2.3(w) - Door and Gate Equipment 1/11/11 73 8.10 Required Alteration Tests for Alteration to Door Operator Traction - 8.10.2.3.2 (a) Power operation to the door system tests - continued: 8.10.2.2.4(b) - Hoistway Doors 8.10.2.2.4(d) - H/W Door Locking Devices 8.10.2.2.4(e) - Access to Hoistway 8.10.2.2.4(f) - Power Closing of H/W Doors 8.10.2.2.4(g) - Sequence Operation

8.10.2.2.6 - Firefighters Emergency Operation Test 1/11/11 74 8.10 Required Alteration Tests for Alteration to Door Operator 1002.2h Power Operation of Door System 112.3a Power Closing (A17.1-1996/7) Item 1.8 Door Closing Force (30 lbf) 8.10.2.2.1(h) Door Closing Force Test 2.13.4 Closing Limitations for Power-Operated Horizontally Sliding Hoistway Doors and Horizontally Sliding Car Doors or Gates Item 1.8 Door Closing Force (30 lbf) 1/11/11 75 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.1(i) Door Closing Time Test 2.13.3 Power Closing per Data Plate 2.13.4.2.4 Item 1.9 Power Closing of Doors or Gates 8.10.2.2.1(j) - Power Opening of Doors (1) Power Opening of Doors (2.13.2)

(2) Leveling Zone & Leveling Speed (2.26.1.6.3) (3) Inner Landing Zone (2.26.1.6.7) DOOR OPERATOR DATA PLATE 1/11/11 NORMAL Seconds REDUCED Seconds 76 cdp A17.1a-2005 Acceptance 8.10.2.2.1(j) Category 1 8.11.2.2.8

Category 5 8.11.2.3.7 8.11.2.3.8 8.11.2.3.9 A17.2-2004 Item 1.10.2 1/11/11 Anti-creep 77 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.1(t) - Door Monitoring Systems 2.26.5 - System to Monitor and Prevent Automatic Operation of the Elevator With Faulty Door Contact Circuits 8.10.2.2.3(c)(3) Top of Car Inspection Operation with open door circuits 2.26.1.5 - Inspection Operation With Open Door Circuits (Test operation of Bypass Switches on the controller for Car and Hoistway Doors) 1/11/11 78 8.10 New Required Alteration Tests

for Alteration to Door Operator 8.10.2.2.3(j) - Car Leveling Devices 2.26.1.6 - Operation in Leveling or Truck Zone Item 3.7 - Car Leveling and Anticreep Devices Periodic Inspections (no separate Acceptance) 3.7.1.1 Electric Elevators 3.7.1.2 Hydraulic Elevators 8.10.2.2.3(w) - Door and Gate Equipment 2.11, 2.12, and 2.13 - Hoistway Doors 2.11.1.2 - Emergency Doors 1/11/11 79 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.3(w) - Door and Gate Equip. (cont.) 2.1.1.1.3 and 2.11.15.1 - Hoistway Door Labels 2.11.11.8 - Door safety retainers, location, and function 2.12.2.2 and 2.12.3.2 - Door closed position 2.11.11.5.8 and 2.11.12.4.8 - Hoistway Door Hanger 2.12.2.3, 2.12.2.5, 2.12.3.3, 2.12.3.5, 2.26.2.14, and 2.26.4.3 - Hoistway Door Locking Device 1/11/11

80 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.4(b) - Hoistway Doors (2.11) (1) test of closed bi-parting doors (2.11.12.4.3 and 2.11.12.4.7) (2) hoistway door (2.11) Item 4.2.3 Acceptance Inspection Examine hoistway doors...measure the distances between the hoistway face of the hoistway doors and the car door or gate.... Note: Items are from Inspector Guide A17.2-2004 1/11/11 81 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.4(d) - Hoistway Door Locking Devices (2.12.2.3, 2.12.2.5, 2.12.3.3, 2.12.3.5, 2.12.4.3, 2.26.2.14, and 2.26.4.3) Item 4.4.3 Acceptance Inspection Verify that the interlocks, or the mechanical locks and

electric contacts, are of a type that have been tested and approved, and are marked for identification 1/11/11 82 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.4(e) - Access to Hoistway (1) access for maintenance (2.12.6 and 2.12.7) (2) access for emergency (2.12.6) Item 4.5.1 (no unique acceptance inspection) (a) Unlocking Devices (b) Hoistway Access Switches 1/11/11 83 8.10 New Required Alteration Tests for Alteration toClosing Door of Operator 8.10.2.2.4(f) - Power

Hoistway Doors 2.13.1(type), 2.13.3(horz), and 2.13.4(v/l) Item 4.6.3 Acceptance Inspection Where both a hoistway door and a car door or gate are opened and/or closed by power, check that the hoistway door and the car door or gate are (a) both of the horizontally sliding type; or (b) both of the vertically sliding type So then horizontally sliding hoistway doors and vertically sliding car door on the same car wont pass! 1/11/11 84 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.4(g) - Sequence Operation 2.13.6 - Sequence Operation for Power-Operated Hoistway Doors With Car Doors or Gates 2.13.3.4 - Power Closing of Vertically Sliding Hoistway Doors and Vertically Sliding Car Doors or Gates by Momentary Pressure or by Automatic Means Item 4.7.1 (no unique acceptance inspection) (a) hoistway

door 2/3 open before car door starts (b) car door 2/3 closed before hoistway door starts 1/11/11 85 8.10 New Required Alteration Tests for Alteration to Door Operator 8.10.2.2.6 - Firefighters Emergency Operation. Verify conformance with 2.27.3 through 2.27.8. And on Hydro and on Traction (presumably omitted by accident) 8.10.2.2.1(a) Door Reopening Device - 2.13.5 Item 1.1.1 (no unique acceptance inspection) (a) Mechanical Reopening Device (Safety Edge). (b) Electronic Reopening Device.. (c) Photoelectric Reopening Device. 1/11/11 86 Electric Elevator - Acceptance Test Tag DO NOT REMOVE

Person or Firm Performing Test: Date: Door Operation Tests Witnessed by: QEI # REQ. # Devices Tested/ Test Results of Tests 8.10.2.2.1(h) Door Closing Force Test 8.10.2.2.1(i) Door Closing Time Test 8.10.2.2.1(j)(1) Door Opening 8.10.2.2.1(j)(2) Leveling Zone and Speed 8.10.2.2.1(j)(3) Inner Landing Zone 8.10.2.2.1(q) Emergency / Standby Power Test 8.10.2.2.2(v) Braking System Test TN 10-962 (work in progress) 8.10.2.2.2(y)(3)

Winding Drum Machines Slack Rope 8.10.1.1.4 A permanent test record showing the test dates, the 8.10.2.2.2(y)(6) W.D. Mach. Final Terminal Stopping requirement number for each test, the name of the person or firm 8.10.2.2.2(cc)(a) Stop name, QEI-1 number and certifying performing theEmergency test, inspectors organization that witnessed 8.10.2.2.2(cc)(3) Traction Limitthe tests shall be made a permanent part of the maintenance records. (8.6.1.4.1) The test record/tag 8.10.2.2.2(ff) Terminal Stopping Devices Test shall documentGovernors all applicable acceptance

8.10.2.2.2(hh) Overspeed Testtests shown in the following tables: 8.10.2.2.2(ii) Car Safety Test 8.10.2.2.2(ii)(2) Car Safety Type A inertia app. Test 1/11/11 87 8.10.2.2.2(ii) Counterweight Safety Test 8.10.2.2.2(ii)(2) Cwt Safety Type A inertia app. Test 8.10 Required Alteration Tests Machine Alterations 1/11/11 88 8.10 Required Alteration Tests Traction - 8.10.2.3.2 (i) Machine Alteration tests: (i) Where the location of the driving machine has been changed (8.7.2.25.2), for alterations as described in 8.7.2.25.2(a) (no change in rise), tests shall be performed as specified in 8.10.2.2.2(d), (i), (n), and (v)(3).

For alterations as described in 8.7.2.25.2(b) (change in rise), tests shall be performed as specified in 8.10.2.2. NOTE: These tests apply to change of location 1/11/11 89 8.10 Required Alteration Tests Traction - 8.10.2.3.2 (r) Machine Alteration tests: (r) Where an alteration is made that results in a new drive machine (see 8.7.2.25.1), tests shall be performed as specified in 8.10.2.2.2(j), (n) through (s), (v), (w), (cc), and (dd); and 8.10.2.2.1(q). Also see 8.10.2.3.2(t) Change in Type of Motion Control for new motor. So thats it for machine, right? 1/11/11 90 8.10 Required Alteration Tests NOT SO FAST: How about are made to other driving machine Components Electric Elevator - Acceptance Test Tag DO NOT REMOVE

8.7.2.25.1(b) Person or Firm Performing Test: Date: Witnessed Traction - 8.10.2.3.2 Machine by: QEI(h) # Alteration tests: REQ. # Devices Tested/ Test Results of Tests (h) Where Door alterations areTest made to a driving 8.10.2.2.1(h) Closing Force 8.10.2.2.1(i) Closing Time Test machine Door brake (see

8.7.2.25), tests shall be 8.10.2.2.1(j)(1) Door Opening performed as specified in 8.10.2.2.2(o) and 8.10.2.2.1(j)(2) Leveling Zone and Speed (v)(3). Inner Landing Zone 8.10.2.2.1(j)(3) 8.10.2.2.1(q) Emergency / Standby Power Test 8.10.2.2.2(v) Braking System Test 8.10.2.2.2(y)(3) Winding Drum Machines Slack Rope 8.10.2.2.2(y)(6) W.D. Mach. Final Terminal Stopping 1/11/11 91 8.10.2.2.2(cc)(a) Emergency Stop 8.10 Required Alteration Tests Rope Brake 1/11/11 92 REQ. #

Devices Tested/ Test Results of Tests 8.10.2.2.1(h) Door Closing Force Test 8.10.2.2.1(i) Door Closing Time Test 8.10.2.2.1(j)(1) Door Opening Ascending Car 8.10.2.2.1(j)(2) Leveling Zone and Speed Overspeed, and Unintended Car Motion 8.10.2.2.1(j)(3) Inner Landing Zone 8.10.2.2.1(q) ProtectionEmergency / Standby Power Test 8.10.2.2.2(v) Braking System Test (1) Ascending Car Drum Overspeed 8.10.2.2.2(y)(3) Winding MachinesProtection.

Slack Rope The means 8.10.2.2.2(y)(6) W.D. Mach. car Finaloverspeed Terminal Stopping to prevent ascending shall be inspected 8.10.2.2.2(cc)(a) Emergency Stop and tested with no load in the car to verify conformance 8.10.2.2.2(cc)(3) Traction Limit with 2.19.1.2. 8.10.2.2.2(ff) Terminal Stopping Devices Test 8.10.2.2.2(hh) Governors Overspeed Test (2) Unintended Car Motion. The means to prevent 8.10.2.2.2(ii) Car Safety Test unintended car motion shall be inspected 8.10.2.2.2(ii)(2) Car Safety Type

A inertia app. Test and tested to 8.10.2.2.2(ii) Counterweight Test verify conformance with Safety 2.19.2.2. 8.10.2.2.2(ii)(2) Cwt Safety Type A inertia app. Test 8.10.2.2.2(jj)(1) Ascending Car OS Protection Test 8.10.2.2.2(jj)(2) Unintended Car Movement Test 8.10.2.2.2(mm) Emergency Brake 8.10.2.2.3(d) Top Car Clearance / Refuge Space 1/11/11 93 8.10.2.2.3(ff) Unexpected Car Movem. (top-of-car) 8.10 Required Alteration Tests Traction - 8.10.2.2.2 (cc) 8.10 Required Alteration Tests Control Alteration

1/11/11 94 8.10 Required Alteration Tests for Alteration to Controller 8.10.2.3.2 Tests shall be performed when the following alterations are made: (s) Where a controller is installed as part of an alteration without any change to the type of operation or control (see 8.7.2.27.4), tests shall be performed as specified in 8.10.2.2.1(c), (j), (q), and (t); 8.10.2.2.2(k), (l), (m), (t), (u), (y), (z), (cc), and (dd); and 8.10.2.2.6. 1/11/11 95 8.10.2.2.1(q) Emergency / Standby Power Test 8.10.2.2.2(v) Braking System Test 8.10.2.2.2(y)(3) Winding Drum Machines Slack Rope 8.10.2.2.2(y)(6) W.D. Mach. Final Terminal Stopping 8.10.2.2.2(cc)(a) Emergency Stop 8.10.2.2.2(cc)(3) Traction Limit 8.10.2.2.2(ff)

Terminal Stopping Devices Test 8.10.2.2.2(hh) Governors Overspeed Test 8.10.2.2.2(ii) Car Safety Test 8.10.2.2.2(ii)(2) Car Safety Type A inertia app. Test 8.10.2.2.2(ii) Counterweight Safety Test (t) Where an alteration is made that results in a 8.10.2.2.2(ii)(2) Cwt Safety Type A inertia app. Test 8.10.2.2.2(jj)(1) Car OS change Ascending in the type of Protection motion Test or operation 8.10.2.2.2(jj)(2) Unintended Car Movement Test control (8.7.2.27.5 and 8.7.2.27.6), tests shall 8.10.2.2.2(mm) Emergency Brake 8.10.2.2.3(d) Top Car as

Clearance / Refuge be performed specified inSpace 8.10.2.2.2(l) and 8.10.2.2.3(ff) Unexpected Car Movem. (top-of-car) (m). All electrical devices shall be 8.10.2.2.5(c) Car Oil Bufferprotective Test 8.10.2.2.5(c) Counterweight Oil Buffer Test tested for proper operation. 8.10.2.2.5(l) Unexpected Car Movement (pit) 8.10.2.2.6 Firefighters Emergency Operation 8.10 Required Alteration Tests for Alteration to Controller 8.10.2.3.2 Tests shall be performed when the following alterations are made: 1/11/11

96 8.10 Required Alteration Tests for Alteration to Controller 8.10.2.3.2 Tests shall be performed when the following alterations are made: (u) Where an alteration is made that results in a new replacement of a hoistway door, car door, or car gate controller without any change to the operation or control [see 8.7.2.27.4(b)], tests shall be performed as specified in 8.10.2.2.1(i) and (j); and 8.10.2.2.2(l)(1), (l)(2), (l)(3), and (l)(5). 1/11/11 97 Electric Elevator - Acceptance Test Tag DO NOT REMOVE Date: Witnessed by: QEI # REQ. # 8.10.2.2.1(h) 8.10.2.2.1(i) 8.10.2.2.1(j)(1) 8.10.2.2.1(j)(2)

8.10.2.2.1(j)(3) 8.10.2.2.1(q) 8.10.2.2.2(v) 8.10.2.2.2(y)(3) 8.10.2.2.2(y)(6) 8.10.2.2.2(cc)(a) 8.10.2.2.2(cc)(3) 8.10.2.2.2(ff) 8.10.2.2.2(hh) 8.10.2.2.2(ii) 8.10.2.2.2(ii)(2) 8.10.2.2.2(ii) 8.10.2.2.2(ii)(2) 8.10.2.2.2(jj)(1) 8.10.2.2.2(jj)(2) 8.10.2.2.2(mm) 8.10.2.2.3(d) 8.10.2.2.3(ff) 8.10.2.2.5(c) 8.10.2.2.5(c) 1/11/11 8.10.2.2.5(l) 8.10.2.2.6 Devices Tested/ Test Door Closing Force Test Door Closing Time Test Door Opening Leveling Zone and Speed Inner Landing Zone

Emergency / Standby Power Test Braking System Test Winding Drum Machines Slack Rope W.D. Mach. Final Terminal Stopping Emergency Stop Traction Limit Terminal Stopping Devices Test Governors Overspeed Test Car Safety Test Car Safety Type A inertia app. Test Counterweight Safety Test Cwt Safety Type A inertia app. Test Ascending Car OS Protection Test Unintended Car Movement Test Emergency Brake Top Car Clearance / Refuge Space Unexpected Car Movem. (top-of-car) Car Oil Buffer Test Counterweight Oil Buffer Test Unexpected Car Movement (pit) Firefighters Emergency Operation Results of Tests Acceptance Inspection Tag Person or Firm Performing Test:

98 Contact Information [email protected] office:281/257-0516 cell: 832/239-2513 1/11/11 www.CodeDataPlate.com 99 What Code to use for Inspections? A17.1a-2005? Installation Code? A17.3-1996? A17.3-2008? A17.2-2010? FBC? 1/11/11

www.CodeDataPlate.com 100 When is Code Effective? Date of Contract? Date of Permit? Date of Inspection? If Alteration, What Rules Apply? Only work done by Elevator Contractor now? All alterations since installation? Only alterations now part of the installation? 1/11/11 www.CodeDataPlate.com 101 Edition/Amendment Effective Dates CodeEdition ASME A17.1a-2005 ASME A17.1-2000 ASME A17.1b-1998 ASME A17.1b-1995 ASME A17.1b-1992 ASME A17.1a-1991 ASME A17.1-1990 ASME/ANSI A17.1b-1989

ASME/ANSI A17.1a-1988 ASME/ANSI A17.1-1987 ANSI/ASME A17.1e-1987 ANSI/ASME A17.1c-1986 ANSI/ASME A17.1b-1985 ANSI/ASME A17.1-1984 ANSI/ASME A17.1b-1983 ANSI/ASME A17.1a-1982 ANSI/ASME A17.1-1981 ANSI A17.1b-1980 ANSI A17.1a-1979 ANSI A17.1-1978 ANSI A17.1g-1976 ANSI A17.1f-1975 ANSI A17.1c-1974 ANSI A17.1b-1973 ANSI A17.1a-1972 ANSI A17.1-1971 ANSI A17.1d-1970 USAS A17.1b-1968 USAS A17.1a-1967 ASA A17.1-1965 1/11/11 StartDate EndDate December 8, 2006

October 1, 2005 October 4, 2000 August 1, 1996 February 2, 1994 August 29, 1992 August 9, 1991 May 31, 1990 May 16, 1989 November 1, 1988 November 1, 1987 October 31, 1986 July 1, 1986 July 1, 1985 September 19, 1984 July 1, 1983 July 1, 1982 September 1, 1980 July 1, 1979 October 1, 1978 December 1, 1976 November 1, 1975 May 1, 1974 November 1, 1973 March 1, 1972 January 1, 1972 July 1, 1971 January 1, 1970 January 18, 1968 April 1, 1966

December 7, 2006 September 30, 2005 October 3, 2000 July 31, 1996 February 1, 1994 August 28, 1992 August 8, 1991 May 30, 1990 May 15, 1989 October 31, 1988 October 31, 1987 October 30, 1986 June 30, 1986 June 30, 1985 September 18, 1984 June 30, 1983 June 30, 1982 August 31, 1980 June 30, 1979 September 30, 1978 November 30, 1976 October 31, 1975 April 30, 1974 October 31, 1973 February 29, 1972 December 31, 1971 June 30, 1971 December 31, 1969 January 17, 1968

Florida Serial Number 92918 89682 59628 51752 47694 46588 45796 44573 43255 42310 41099 39637 39414 37812 36387 34073 32996 30297 28921 27033 24572 24016 22172 20916 10205 9982 9296

7521 4420 4182 102 SECTION 8.9 CODE DATA PLATE (a-2005) Requirement 8.9 contains requirements for all new and existing equipment within the Scope of this Code. 8.9.1 Required Information Data plate shall be provided and maintained that shall indicate the Code to be used for inspections and tests (see 8.10.1.2). The data plate shall indicate the Code and edition in effect at the time of installation. The data plate shall also indicate the Code in effect at the time of any alteration and indicate the applicable requirements of 8.7. 8.9.2 Location The data plate shall be in plain view, securely attached to the main line disconnect or on the controller. 8.9.3 Material and Construction The data plate shall be of such material and construction that the letters and figures stamped, etched, cast, or otherwise applied to the face shall remain permanently and readily legible. The height of the letters and 1/11/11figures shall be not less than 3.2 mm (0.125 in.). 103

SECTION 8.9 CODE DATA PLATE (2007, a-08 & b-09) Requirement 8.9 contains requirements for all new and existing equipment within the Scope of this Code. 8.9.1 Required Information Data plate shall be provided and maintained that shall indicate the Code to be used for inspections and tests (see 8.10.1.2). The data plate shall indicate the Code and edition in effect at the time of installation. The data plate shall also indicate the Code in effect at the time of any alteration and indicate the applicable requirements of 8.7. (b) (07) 8.9.2 Location The data plate shall be in plain view, securely attached to the main line disconnect or on the controller. It shall also be permitted to locate the data plate in the controller as long as it is in plain view with the controller door open. An additional data plate shall be installed in the vicinity of the starting switch on the exterior of escalators and moving walks 8.9.3 Material and Construction The data plate shall be of such material and construction that the letters and figures stamped, etched, cast, or otherwise applied to the face shall remain permanently 1/11/11 and readily legible. The height of the letters and figures shall be not less than 3.2 mm (0.125 in.).

104 8.6.1.6.7 Check for any Missing or Damaged Signs and Data Plates Machine Room Hoistway and Pit Brake Plates Governor Plate Code Data Plate Ambient Air Plate Hydro Data Plates Warning Signs Fire Service Signs 1/11/11

Crosshead Data Plate Rail Lube Instructions Warning Signs Safety Plank Plate Buffer Plate Counterweight Runby Freight & Capacity www.CodeDataPlate.com 105 CODE DATA PLATE CODE DATA PLATE INSTALLATION CODE: ASME A17.1a-1997 ANSI A17.1-1978 ALTERATION CODE: ASME A17.1-2000 SECT. 8.7 REQUIREMENTS COMPLIED WITH:

codedataplate.com INSTALLATION CODE: #REF! 8.7.2.11.5, 8.7.2.28. codedataplate.com DOOR OPERATOR DATA PLATE NORMAL Seconds REDUCED Seconds cdp MAXIMUM

COUNTERWEIGHT RUNBY 24" BUFFER MARKING PLATE LOAD RATING: STROKE: NUMBER OF SPRINGS: 6000 POUNDS 2 1/2 INCHES 2 CDP

CROSSHEAD DATA PLATE COMPLETE CAR WEIGHT: RAIL LUBRICATION INSTRUCTIONS: RATED LOAD: POUNDS POUNDS RATED SPEED: NUMBER OF ROPES: DIAMETER: RATED BREAKING STRENGTH: DO NOT LUBRICATE 1/11/11 MANUFACTURED:

cdp F.P.M. IN. POUNDS BY: RAIL LUBRICATION INSTRUCTIONS: the safety for the characteristics of the rail lubricant to be used. 106 Products CODE DATA PLATE INSTALLATION CODE: CODE DATA PLATE ASME A17.1a-1997 ALTERATION CODE: A17.1-1965 b-1980 codedataplate.com

a-1982 a-1985 a-1967 -1978 b-1989 a-1997 PART XII RULES COMPLIED WITH: #REF! 1200.5d CODE DATA PLATE INSTALLATION CODE: ALTERATION CODE: 1202.7 ANSI A17.1-1971 1201.10 1201.11 1201.12

1202.5 1202.9 1202.12 1202.13 1202.14 nyc-97tr-alt cdp ASME A17.1-2000 SECT. 8.7 REQUIREMENTS COMPLIED WITH: 8.7.2.1.5, 8.7.2.8, 8.7.2.11.5, 8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.19, 8.7.2.20, 8.7.2.25.1(b), 8.7.2.27.1, 8.7.2.27.2, 8.7.2.27.5, 8.7.2.28 codedataplate.com CODE DATA PLATE INSTALLATION CODE: NYC BC 1938 - Article 14 ALTERATION CODE:

ASME/ANSI A17.1b-1989 PART XII RULES COMPLIED WITH: #REF! 1200.5d, 1201.3, 1201.10b, 1201.11a, 1201.12, 1202.3c, 1202.4a, 1202.5a, 1202.11, 1202.12a, 1202.12b, 1202.12e, 1202.13 DOOR OPERATOR DATA PLATE 1P30777 codedataplate.com 1/11/11 NORMAL Seconds REDUCED Seconds

www.CodeDataPlate.com cdp 107 1/11/11 108 1/11/11 Courtesy of Don Rosenberger 109

Recently Viewed Presentations

  • &quot;I&#x27;m sad, mad and traumatized… and you still want me to learn?&quot;

    "I'm sad, mad and traumatized… and you still want me to learn?"

    ― Haim G. Ginott. A.W. There is a student who has and is enduring some major life challenges. She has seen things that we hope nobody ever has to see. She has been abused in many ways and completely neglected....
  • which way? Psalm 1:1-6 the way of the godly &amp; the ungodLy ...

    which way? Psalm 1:1-6 the way of the godly & the ungodLy ...

    Psalm 1. Which Way. Psalm 1:1-6. Choices…we are our choices. Jean Paul Sarte. the way of the godly. the . PRACTICE. of the BLESSED. Is the counsel helping me to deal with the truth or just helping me to believe...
  • Draw and Label the Body Parts. CAUDAL FIN

    Draw and Label the Body Parts. CAUDAL FIN

    Compressiform. Elongate. Horizontally stretched (eel-like) Flattened horizonatally (usually bottom dwellers) Rounded and tapering at each end (speed) ... Write each of the following mouth types and label the fish that matches. Upward facing mouth to ambush prey.
  • Response to Literature Sharing responses to a story

    Response to Literature Sharing responses to a story

    Stories touch people in different ways. Some readers might like "Seventh Grade" by Gary Soto because they recognize themselves in Victor. Others might like "Zebra" by Chaim Potok because they admire Zebra's strength.
  • The Beliefs of Christianity PowerPoint Notes

    The Beliefs of Christianity PowerPoint Notes

    Basic Beliefs of Christianity. HW : Christianity and Judaism Quiz . ... In order to avoid offending any god, the Romans prayed to a wide variety of gods and goddesses. The Romans would only ban a religion when they thought...
  • NHS WEST KENT CCG - GP Patient

    NHS WEST KENT CCG - GP Patient

    Author: Sylvie.Hobden Created Date: 04/19/2012 04:10:37 Title: Slide 1 Keywords: PowerPoint potx Template Ipsos MORI Last modified by: svc_MRDD Company
  • CS0447 Computer Organization &amp; Assembly Language

    CS0447 Computer Organization & Assembly Language

    CS/COE0447 Computer Organization & Assembly Language Logic Design Appendix B Outline Example to begin: let's implement a MUX! Gates, Truth Tables, and Logic Equations Combinatorial Logic Constructing an ALU Memory Elements: Flip-flops, Latches, and Registers (if there is time) Logic...
  • A. Morton Thomas and Associates, Inc. Booth 107 Engineering ...

    A. Morton Thomas and Associates, Inc. Booth 107 Engineering ...

    A. Morton Thomas and Associates, Inc. Booth 107 Engineering, surveying, landscape architecture, planning Don Rissmeyer, Associate 10710 Midlothian Turnpike Suite 202, Richmond, VA 23235 (804) 276-6231 www.amtengineering.com Last modified by: gharter