Welcome Thanks for joining this ITRC Training Class

Welcome  Thanks for joining this ITRC Training Class

Welcome Thanks for joining this ITRC Training Class Permeable Reactive Barrier (PRB): Technology Update [insert team graphic] ITRC Technical Regulatory Guidance Document: Permeable Reactive Barrier: Technology Update (PRB-5, 2011) Sponsored by: Interstate Technology and Regulatory Council (www.itrcweb.org) Hosted by: US EPA Clean Up Information Network (www.cluin.org) Housekeeping Course time is 2 hours Question & Answer breaks Phone - unmute *6 to ask question out loud Simulcast - ? icon at top to

type in a question Turn off any pop-up blockers Download slides as PPT or PDF Go to slide 1 Move back 1 slide Move forward 1 slide Move through slides Arrow icons at top of screen List of slides on left Feedback form available from last slide please complete before leaving This event is being recorded Go to last slide

Go to seminar homepage Submit comment or question Report technical problems Copyright 2012 Interstate Technology & Regulatory Council, 50 F Street, NW, Suite 350, Washington, DC 20001 ITRC Disclaimer This material was sponsored by an agency of the United States Government. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof and no

official endorsement should be inferred. The information in ITRC Products was formulated to be reliable and accurate. However, the information is provided "as is" and use of this information is at the users own risk. Information in ITRC Products is for general reference only; it should not be construed as definitive guidance for any specific site and is not a substitute for consultation with qualified professional advisors. ITRC Product content may be revised or withdrawn at any time without prior notice. ITRC, ERIS, and ECOS make no representations or warranties with respect to information in its Products. ITRC, ERIS, and ECOS will not accept liability for damages of any kind that result from acting upon or using this information. ITRC, ERIS, and ECOS do not endorse or recommend the use of specific technology or technology provider through ITRC Products. ITRC (www.itrcweb.org) Shaping the Future of Regulatory Acceptance Host organization Network State regulators

All 50 states, PR, DC Federal partners IndustryDOD AffiliatesEPA Program ITRCDOE Wide variety of topics Technologies Approaches Contaminants Sites Products Technical and regulatory guidance documents Academia Community stakeholders

Internet-based and classroom training ITRC Course Topics Planned for 2012 More information at www.itrcweb.org Popular courses from 2011 New in 2012 Green & Sustainable Bioavailability Considerations for Contaminated Sediment Sites Remediation

Biofuels: Release Prevention, Environmental Incremental Sampling Behavior, and Remediation Methodology Decision Framework for Applying Attenuation Integrated DNAPL Site Processes to Metals and Radionuclides Development of Performance Specifications Strategy for Solidification/Stabilization LNAPL 1: An Improved Understanding of 2-Day Classroom Training: LNAPL Behavior in the Subsurface Light Nonaqueous-Phase LNAPL 2: LNAPL Characterization and Liquids (LNAPLs): Recoverability - Improved Analysis Science, Management, LNAPL 3: Evaluating LNAPL Remedial and Technology Technologies for Achieving Project Goals October 16-17, 2012 in Novi, Mine Waste Treatment Technology Selection Michigan (Detroit Area) Phytotechnologies Permeable Reactive Barrier (PRB): Technology Update Project Risk Management for Site Remediation

Use and Measurement of Mass Flux and Mass Discharge Use of Risk Assessment in Management of Contaminated Sites Meet the ITRC Instructors John Doyon New Jersey Department of Environmental Protection Trenton, New Jersey 609-633-0713 John.Doyon @dep.state.nj.us Bruce Henry Representing AFCEE Denver, Colorado 303-831-8100 bruce.henry @parsons.com Cannon Silver CDM Smith Columbus, Ohio 614-847-6866 Silvercf @cdmsmith.com

Scott Warner AMEC Environment and Infrastructure Oakland, California 510-663-4269 scott.warner @amec.com PRB Update: Course Road Map John Doyon New Jersey Department of Environmental Protection Trenton, New Jersey 609-633-0713 John.Doyon @dep.state.nj.us

Introduction Regulatory Considerations Science of Permeable Reactive Barriers (PRBs) Reactive Materials Improved Construction Methods Performance Monitoring Longevity of PRBs Enhancing Effectiveness Permeable Reactive Barriers (PRBs) Treated Groundwater Source Area u Gro nd ter a

w w Fl o Permeable Reactive Barrier Contaminant-bearing Groundwater PRB is a continuous, in-situ permeable treatment zone designed to intercept and remediate a contaminant plume. Contaminants may be treated through physical, chemical, or biological processes Uses a variety of materials and installation techniques Treats an ever increasing list of contaminants Part of an overall site close/exit strategy PRB Example Installation Installation of PRB at West Valley, New York (photo courtesy of Dewind One-pass Trenching) Tools for Your Remediation Tool Box

Over 15 year of PRB lessons learned PRB advantages and limitations Application of new reactive materials Identify potential design and construction challenges Performance monitoring approaches Opportunities for enhancing PRB effectiveness ITRC Guidance/Training Key to PRB Use/Acceptance

1999 - PBW- 1 Regulatory Guidance for Permeable Reactive Barriers Designed to Remediate Chlorinated Solvents 1999 - PRB- 3 Regulatory Guidance for Permeable Reactive Barriers Designed to Remediate Inorganic and Radionuclide Contamination 2000 - PBW- 2 Design Guidance for Application of Permeable Reactive Barriers for Groundwater Remediation 2005 - PRB- 4 Permeable Reactive Barriers: Lessons Learned/New Directions 2011 - PRB-5 Permeable Reactive Barriers: Technology Update Over 15 Years of PRB Experience

ITRC PRB Update Team and 2011 Guidance Team Composition Academia, 2 States, 6 Community Stakeholder, 1 DOE, 1 DoD, 7 EPA, 1 Private Sector, 12 ITRC Technical and Regulatory Guidance Permeable Reactive Barrier: Technology Update (PRB- 5, 2011) Key PRB Considerations

Base technology is accepted as mainstream (almost) New media and new construction methods PRBs are addressing more contaminants and being installed deeper Combined with source area treatments (ITRC BIODNAPL guidance documents 2005 - 2008) Sequential aerobic/anaerobic treatment for multiple contaminants PRB as a green technology PRB Advantages and Limitations Advantages Contains the plume while

source is remediated Reduces mass discharge and accelerates monitored natural attenuation (MNA) Treats broad spectrum of contaminants Green and sustainable low energy requirements Low operations and maintenance cost Long-term effectiveness System is unobtrusive once installed Limitations Existing infrastructure Depth, hydraulic limits Performance may decrease over time PRB-5: Figure 6-1. Horizontal PRB treatment of septic system nitrate (Courtesy of Septech, Inc., 2003)

Regulatory Considerations for PRBs In most cases, regulatory permits are not required for PRB operation, however: Review of permitting issues should be conducted on a site-specific basis Permits may be necessary during construction, monitoring or closure of systems Underground Injection Control (UIC) Permit varies by state Discharge Permits (NPDES) may be required if excess fluid generated during construction See PRB-5, Section 2 for Regulatory Considerations Regulatory Considerations for PRBs (continued)

Downgradient groundwater quality issues (secondary water quality) Performance monitoring requirements Institutional controls Contingency planning Community considerations (public perception) See PRB-5, Section 2 for Regulatory Considerations Using PRBs: Your Remedial Strategy Selected as final remedy

Altus Air Force Base, Oklahoma Seneca Army Depot, New York Selected part of overall remedial strategy West Valley, New York Offutt Air Force Base, Nebraska Remedy success example Led to property transfer at large Naval facility in McGregor, Texas Over 200 PRBs installed as of 2011 See PRB-5 Appendix A. Case Summaries After this training class you should be able to. Apply ITRCs PRB Guidance Understand basic PRB science and advantages/limitations

Determine when PRBs should be considered Understand PRB use with other technologies Formulate questions to identify potential design and construction challenges Understand performance monitoring approaches and longevity considerations Access additional PRB resources PRB Update: Course Road Map

Bruce Henry Representing AFCEE Denver, Colorado 303-831-8100 [email protected] Introduction Regulatory Considerations Science of PRBs Reactive Materials Improved Construction Methods Performance Monitoring Longevity of PRBs Enhancing Effectiveness Science of PRBs Key Concepts for Successful PRBs. Match the correct treatment media and degradation or

removal process to the contaminant(s) Provide adequate contact/residence time to reduce the contaminants to target concentrations Intercept the plume without contaminant bypass Are effective long enough to achieve site-wide remedial objectives Matching the Media to the Contaminant How the material treats the contaminant The reaction kinetics (destructive) or treatment

capacity (non-destructive) How site-specific geochemistry will affect the treatment process (e.g., potential for mineral passivation or biological sulfide toxicity) How to use new materials effectively combined iron and carbon materials, zeolites, and organophilic clays EHC powder combination plant fiber and zero-valent iron (ZVI) (photo courtesy Adventus) Destructive Processes to Treat the Contaminant Biotic degradation (e.g., dechlorination of solvents) Abiotic degradation to non-toxic end products (e.g., elimination of TCE by ZVI or iron sulfides) Non-Destructive Processes to Treat

the Contaminant Sorption and surface complexation Cation exchange (e.g., Sr90 to zeolite or metals to apatite) Transformation to less toxic forms (e.g., reduction of Cr6+ to Cr3+ or NO3- to NO2- ) Electron micrograph illustrating morphology and micro porosity of apatite materials. Adapted from USEPA (2000). What Contaminants can be Treated? PRBs have commonly been applied to: Organics (e.g., solvents/fuels/creosote) Perchlorate and energetics such Royal Demolition Explosive (RDX) or Trinitrotoluene (TNT) Inorganics (e.g., radionuclides, metals, anions) See Table 4.1 in the PRB document for an extensive list of media and contaminants

Future PRBs to treat emerging contaminants Unique monitoring methods may be required to document the treatment process Monitoring for toxic intermediates Mineralogy and passivation Reactive iron sulfides, for example framboidal pyrite (Lebron et al., 2010) Treatment Materials and Mechanisms (PRB-5: Section 4) Media: Zero-Valent Iron (granular to nano-scale) First used for: TCE (1997) Contaminants Treated Treatment Mechanisms Chlorinated solvents Abiotic reductive dechlorination Energetics (TNT, RDX) Reductive degradation

Redox-sensitive metals [Cr(VI)] Reductive precipitation Redox-sensitive oxyanions (U, Se) Reduction, sorption, precipitation Arsenic Sorption and co-precipitation Divalent metals (Cu, Zn) Sorption, reduction, precipitation Case Studies: Coast Guard Support Center, Elizabeth City, NC (TCE, CrVI) Commercial Street Operable Unit, Sunnyvale, CA (TCE) Cornhusker Army Ammunition Plant, NE (RDX, TNT) Treatment Materials and Mechanisms (PRB-5: Section 4) Media: Solid Organic Amendments (wood chips, leafy compost) First used for: Nitrate (1995); Acid Mine Drainage (1997); TCE and perchlorate

(1999) Contaminants Treated Treatment Mechanisms Chlorinated solvents Biological and abiotic dechlorination Perchlorate Microbial degradation Energetics (TNT, RDX) Reductive degradation Nitrate Denitrification (to nitrogen gas) Sulfate Reduction to sulfide Case Studies:

OU-1 Biowall at Altus AFB, Oklahoma (TCE and DCE) Pueblo Depot Activity Biowall, Colorado (RDX) Oklahoma Pork Facility, OK (nitrate) Treatment Materials and Mechanisms (PRB-5: Section 4) Media: Phosphates (Apatite) First used for: Uranium (1997) Contaminants Treated Treatment Mechanisms Radionuclides (U, Sr) Precipitation, surface complexation Lead Precipitation Media: Zeolites First used for: strontium-90 (1998) Contaminants Treated Treatment Mechanisms

Radionuclides (Sr) Cation exchange Ammonium and Perchlorate (lab only) Cation exchange Treatment Materials and Mechanisms (PRB-5: Section 4) Media: Iron and Steel Furnace Slag First used for: phosphate (1999) Contaminants Treated Treatment Mechanisms Phosphate Sorption; Precipitation of Hydroxyapatite Arsenic Sorption and precipitation Divalent metals (lab only)

Sorption and precipitation Chlorinated solvents (lab only) Abiotic reductive dechlorination Media: Organophilic Clays First used for: creosote NAPL (2005) Contaminants Treated Treatment Mechanisms Non-aqueous-phase liquids Sorption PAHs (lab only) Sorption New Reactive Materials Mixed iron and organic substrates Use ZVI as reactive media

and to lower redox state to enhance thermodynamics of degradation reactions Examples Duramend/EHC products, ABC+ product Emulsified Zero-Valent Iron (EZVI) Micrograph of nanoscale iron within an emulsion droplet Granular Activated Carbon impregnated with ZVI BOS 100 product - GAC has very high sorption capacity; may be difficult to evaluate sorption vs degradation Granular mixture of BOS 100 PRB Design

Importance of site characterization - adequate Conceptual Site Models Site-specific geotechnical and geochemical parameters Adequate residence time Use of treatability studies for design with new materials or emerging contaminants Considerations of current and future land issues Long-term operation Can you build in flexibility or contingencies to sustain performance or to address hydraulic changes? Designing for the future (e.g., >10-15 years) Layout of a Conventional PRB System Slurry wall Sheet pile wing wall

~20 wat d n u Gro Bac Aggre gat kfill eb ase Slurry wall ction e r i wd o l f er ent m e

av p t l ha Asp r Filte ic fabr Clay d itar u q a ifer u q A ~40 (Szerdy, et. al., 1996) Zero-valent iron (4) Pea gravel (2 each)

Constructability Geotechnical and Structural Considerations Considerations Sidewall integrity and smearing Settlement and volume changes Infrastructure and load bearing Trench plates used as temporary divider walls during backfill Geotechnical assessment (cone penetrometer soundings) PLAN VIEW Temporary sheet piles Iron 36

Cement bentonite key wall 3/8 pea gravel 4 min. 2 min Reducing uncertainty appropriate pre-design characterization Keyed 18 into slurry wall with sheets 3 (Szerdy, et. al., 1996) Geotechnical Design Defining Lower Confining Unit with CPT Borings Plan View Cross Section Top of Till Depth Trench

Ground Surface Residence Time Impact of Sequential Reductive Dechlorination Residence time may be estimated from reasonable first-order rate constants and maximum contaminant concentrations E PC E TC DC E VC Ethene Use of Multiple PRBs Concentrations along Ash Landfill Biowall Transect Biowalls Groundwater Flow VC

Second biowall required to meet target reductions Ethene Bench-Scale Studies to Estimate Reaction Rates and Media Requirements Bench-scale test for perchlorate and TCE for Naval Weapons Industrial Reserve Plant (NWIRP) McGregor, TX (Perlmutter et al., 2000) Mushroom Compost Oil-coated Wood Shavings Cotton Seed Meal Granular Activated Carbon Construction Methods

Conventional trenching methods Conventional excavators to 25 to 30 feet One-pass trenchers to 35 to 40 feet Biopolymer slurry installation to >50 feet Injection methods Pneumatic and hydraulic fracturing New materials may require new injection methods Alternate methods Deep soil mixing Other considerations Permitting Emplacement verification Continuous One-Pass Trenching Conceptual One-Pass Installation Select backfill

One-Pass Biowall Installation at Ellsworth AFB, South Dakota Depths up to 45 deep (Illustration courtesy Dewind One-pass Trenching) Deep Soil Mixing with BOS 100 at Site 15, Vandenberg AFB, California Product mixed with soil at depths of 28 up to 70 feet A Cross Section A Groundwater Flow Reactive Media Preliminary Results at Site 15 PRB 2 plan view with cis-DCE data (3-5 months) Soil Borings cis-DCE reduced from A 197 ppb to 93 ppb

cis-DCE reduced from 157 ppb to 5.6 ppb Dis c h a rg e tr e n c h a pproximate cis-DCE reduced from 156 ppb to 17 ppb A Groundwater flow direction Direct Injection

ZVI injection at Hunters Point Shipyard Parcel G, November 2008 Photos courtesy U.S. Navy Hydraulic Issues Construction Related Aquifer sediments mixing with reactive media Reduced permeability zone at trench interface (smearing) Short-term effect on hydraulics Gaps in construction Biopolymer slurry wall

installation Construction Verification Distribution of media Hydraulics Has installation disrupted groundwater flow? Is water flowing through the PRB? Changes in water levels and hydraulic gradient Tracer testing (e.g. bromide, dyes) Geochemical parameters pH Redox (ORP) Dissolved oxygen (DO) Example PRB System Costs (from case studies in Appendix B of PRB-5) SITE

MEDIA METHOD LENGTH (feet) DEPTH (feet) SYSTEM COST Coast Guard Support Center, NC (1995) ZVI One Pass Trencher 150 24

$500K Sunnyvale, CA (2003) ZVI Backhoe/ Sheet Pile 700 24 33 $2,100K OU-1, Altus AFB , OK (2002) Mulch One Pass Trencher 455 24

$265K Pueblo Chemical Depot, CO (2005) Mulch One Pass Trencher 105 14 24 $375K Organophilic Clay One Pass Trencher 270 11 $220K

Escanaba, MI (2005) Costs typically include design, monitoring system, and initial monitoring PRB Cost relative to Pump and Treat 1992 1995 From Warner et al., 2010 2000 2005 2010 Permeable Mulch Biowalls Up to 8 years of monitoring indicates mulch will physically last at least 10 to 15 years, but may require replenishment

every 4 to 6 years Can stimulate both biotic and abiotic degradation all w o Bi Grou ndwa ter F low Con Groutaminat ndw ed ater an ater e l C dw n u o Gr Perforated

Pipe Fluid Substrate Addition Case Study NWIRP McGregor, Texas Manufactured weapons and solid-fuel rocket motors from 1942 to 1992 Ammonium perchlorate detected in groundwater Installed nearly 13,000 feet of biowalls along with 1,300 bioborings from 1999 to 2005 Facility designated for closure and property transfer High-Pressure Water Washout of Solid Propellant (photo courtesy US Navy)

Biowall Installation at NWIRP McGregor Rock cutter for trenching in weathered limestone bedrock Trench stays open for installation of perforated pipe and backfill material Photos courtesy US Navy Area S Full-Scale Biowall Layout Biowall Segments pr ope r t y lin e Direction Groundwater Flow 1,000 feet Over 3,000 feet of trenches installed with subsurface piping system for substrate replenishment Trench 1 Perchlorate vs. Time

(Soybean Oil Saturated Wood Chips & Gravel) Total Organic Carbon (TOC) in Biowall 800 Concentration 700 TOC in Biowall (mg/L) Perchlorate 15 ft Upgradient (ug/L) Perchlorate in Biowall (ug/L) Perchlorate 200 ft Downgradient (ug/L) 600 Influent Concentrations 500 400 Rebound Occurring

300 200 TOC <15 mg/L 100 0 0 6 12 18 24 Months Since Installation (Modified from Naval Facilities Engineering Command, 2004) 30 36 Plume Contraction at Area S (Modified from Naval Facilities Engineering Command, 2004)

Perchlorate Changes Over 2 Years 2002 >10,000 1,000 100 2004 10 4 1 0 5,000ft OPS and Ready for Reuse Operating Properly and Successfully (OPS) granted by EPA because...

Three years of data showing biowall effectiveness Natural attenuation (dilution) of perchlorate complementing engineered remediation Facility shutdown and impacted soil removed Human health and environment risks mitigated Onsite plume management zones established Property transferred to City of McGregor for commercial development in October 2006 Currently using an O&M plan to maintain long-term performance Substrate Replenishment (2006) Area S Oldest Biowalls Test the method before O&M contractor took over Emulsified vegetable oil injection event conducted

from August 14-18, 2006 22,000 lbs (2,800 gallons) of undiluted EOS 598 injected into 15 biowalls with 2,300 gallons chase water Photo courtesy of CH2M Hill Little need to rejuvenate; biowalls continue to effectively reduce perchlorate concentrations NWIRP McGregor Biowall Operations over Time Selected biowalls were replenished in Area M and Area S in 2008 and in 2009 (EnSafe and DSE 2010) Most recent Remediation Action Effectiveness Report (RAER) indicates that 11 biowall

segments will need to be replenished in 2010 Two biowall segments at Area A are ready to be decommissioned based on achieving groundwater standards for over 2 years Summary - Whats New for Materials and Design ZVI treatment expanded to energetics (RDX, TNT), Cr(VI), and arsenic Increasing use of combined media, for example organic/iron combinations such as EHC and EZVI Improved understanding of treatment mechanisms, for example abiotic reactions with reduced iron-sulfide minerals Mulch biowalls and future designs using iron and sulfate amendments Deeper trenching equipment, improved hydraulic and pneumatic injection techniques, use of deep soil mixing

Questions & Answers Question & Answer Break Introduction Regulatory Considerations Science of PRBs New Reactive Materials Improved Construction Methods Performance Monitoring Longevity of PRBs Enhancing Effectiveness PRB Update: Course Road Map Cannon Silver CDM Smith

Columbus, Ohio 614-847-6866 [email protected] Introduction Regulatory Considerations Science of PRBs Reactive Materials Improved Construction Methods Performance Monitoring Longevity of PRBs Enhancing Effectiveness Performance and Longevity: Intro Performance Monitoring (PRB-5, Section 7)

Overview of objectives, network design, parameters, downgradient water quality Whats new? Longevity (PRB-5, Section 8) Theoretical Observed Factors impacting longevity Sustainability (PRB-5, Section 9) Defining Performance and Longevity PRB Source zone Water table Groundwater flow direction Performance

How the system meets design intent or functional requirements Attainment of water Remediated water Plume quality objectives Hydraulic system performance Financial goal attainment Sustainability goal attainment Longevity Duration and durability of the treatment Treatment media life span

Rejuvenation options, cost and effectiveness Geotechnical sustainability / durability Sustainability goal attainment Examples of Perceived Failures PRB Requiring Carbon Addition Source Area Grou Fl o r e t ndwa Performance Flow around the PRB due to insufficient site

characterization or changing flow directions w Longevity Rejuvenation required prior to anticipated life time Performance Monitoring PRBs need to be monitored because hydrology and geochemistry can change Proven methods Baseline characterization (Section 7.1) Monitoring network designlocations, frequency, and duration (Section 7.2) Hydraulic performance (Section 7.3) Concentration-based (Section 7.4)

Primary contaminants Geochemical (Table 7-1) See PRB-5, Section 7 Performance Monitoring Design and Assessment Monitoring Well Configurations Conceptual 3D Rendering Performance Monitoring Well Network Permeable Reactive Barrier (PRB) Water level Groundwater flow direction Confining layer 10 feet well screen 2.5 feet well screen 5 feet well screen

Well screen (upgradient of PRB) Well screen (within PRB) Well screen (downgradient of PRB) Note: not to scale (Michalczak, 2010) Single well Well couplet Well cluster PRB Performance Monitoring (continued) New approaches Alternative compliance monitoring metrics (Section 7.5) Geochemistry and microbiology (Section 7.6; Table 7-2) Biogeochemical transformations Improved analytical monitoring tools (Section 7.7) Molecular biological tools (MBTs) Compound-specific isotope analysis (CSIA) Secondary water quality (Section 7.8)

Regulated parameters (Table 7-3) O&M plans with monitoring protocols to evaluate when a PRB should be optimized MBT showing presence of Dehalococcoides (Photo courtesy Idaho National Laboratory) Mass Flux and Concentration Source Zone Fine Sand 3% Concentration (C) = 10,000 g/Lg/L Hydraulic gradient (i) = 0.003 m/m Mass Flux = KiC Hydraulic conductivity (K) = 1.0 m/day Mass Flux = 0.03 g/day/m2

Gravelly Sand 85% K = 33.3 m/day Mass Flux = 1 g/day/m2 Sand 12% K = 5.0 m/day Mass Flux = 0.15 g/day/m2 Figure ES-2 from ITRC Use and Measurement of Mass Flux and Mass Discharge (MASSFLUX-1, August 2010) What is PRB Longevity? Definition of PRB longevity How long a PRB will perform as designed or expected in terms of hydraulic capture, residence time, and reactivity without requiring major

maintenance or replacement of the reactive media Calculated longevity* For ZVI, theoretical lifetime is 80-400 years For biowall, theoretical lifetime 29 years (* Reardon, E.J., 2005 and 1995; Shen et al, 2010) See PRB-5, Section 8 Longevity Observed Longevity ZVI PRBs Majority of PRBs still going strong after 15 years of field experience Other emerging reactive

media Zeolite11+ years Apatitevaries Slag5+ years Mulch biowall 8+ years of monitoring indicates mulch will last at least 10 to 15 years, but some require replenishment after 4 to 6 years ZVI Mulch biowall Theoretical Longevity Field History Zeolite 0 20 40 Years 60

80 100 Factors Influencing PRB Longevity PRB Type Factors Impacting Reactive Media Longevity ZVI Precipitation; passivation ZVI (Injected) Mass and uniformity Mulch Biowalls Carbon substrate bioavailability Mineral Media Contaminant loading; precipitation

Factor: Precipitation and Passivation of ZVI Normally, ZVI corrodes, forming divalent iron species and reducing groundwater conditions Conducts electrons Flux of native inorganic species may: Precipitate, occupy pore space, and block flow Insulate the ZVI (passivation) SEM image of hydrated iron, Hill AFB See PRB-5, Sections 5.2 and 8.2 Factor: Passivation of ZVI Surfaces Nitrate, silica, and phosphate increase the groundwater reduction potential Eh (ORP), allowing trivalent iron oxide films to inhibit iron corrosion and electron transfer

Eh (volts) Tri-valent precipitates (goethite, hematite, maghemite) inhibit iron corrosion Divalent iron (magnetite) allow iron corrosion pH Example of ZVI PRB Longevity Elizabeth City Coast Guard Station, North Carolina ZVI PRB installed in 1996 to treat TCE, Cr(VI) 140-ft long, 2-ft thick, and 22-ft deep Some precipitates on ZVI surface No evidence of decline in PRB performance in 13 years groundwater sampling Only known PRB where

monitoring discontinued after meeting remedial objectives See PRB-5 Appendix A. Case Summaries Example of ZVI PRB Reduced Longevity Hill AFB OU-12, Utah TCE Concentrations (g/L) Over Time 0.5 m (1.5 ft) thick ZVI PRB installed November 2004 to treat TCE Iron 37%; equivalent iron thickness 17 cm (0.55 feet) Nitrate 2 to 13 mg/L Decreasing performance

noted in 2005 Passivation rate 3.8 cm/ yr (1.5 inches/yr) See PRB-5, Section 8.2.2 Field Experience Factor: ZVI Mass and Distribution within Injected PRBs Over 100 sites with micron- or nano-scale ZVI injected since 2002 Most sites targeted 0.4 to 0.8% ZVI by soil mass TCE, chloroform concentrations reduced ORP reduced to less than -200 mV Heterogeneous ZVI distribution Recommend targeting >1% ZVI to achieve true 0.4% iron distribution and beta-elimination pathway (Photo courtesy US Navy) Factors Influencing Longevity of Mulch Biowalls

Initial quantity and bioavailability of organic substrate Rate of groundwater flow Electron acceptor demand Availability and utilization of iron and sulfate Example of Biowall PRB Materials Cotton Gin Compost Mulch Mixture Sand Tree Mulch Examples of Mulch Biowall Carbon Substrate Bioavailability Altus AFB OU-1, Oklahoma TCE removal for 7 years without rejuvenation

Offutt AFB B301, Nebraska Continued TCE removal after 5+ years monitoring without rejuvenation NWIRP McGregor, Texas No rejuvenation required during first 4 years Since then, 13 of 34 biowalls rejuvenated with vegetable oil at frequency of 1-3 years Some biowalls met remedial goals without rejuvenation; monitoring discontinued Examples of Observed Longevity for Mineral Media PRBs Apatite PRB Mixed performance Success Mine PRB: no reduction in treatment efficiency for pH and metals from 2001 to 2004 Other apatite PRBs less successful

Zeolite PRB Chalk River PRB effectively removed Sr-90 from groundwater for 11+ years with no reduction in efficiency Slag PRB East Chicago PRB was effectively removing Arsenic (As) 5 years after installation (2002-2007) Te Ex chn am olo in in p le g y s si t exc it u u ava s bi o the

ch r e rm t ally mica emed ion i at en l de io ha s nc truc n ed ti o r e pu mo n mp val an rec dt i rc rea u in

l at t si t io n ub we io r l ls em ed i at io n in sit ub pe i or rm em eab ed le r i at eac io n ti v pe

eb rm arr ph eab i er yt o le b rem i ot ed rea i at tm io n en ts yst em Continuum of Remediation Technologies: Active to Passive Technology Class Source Removal Interdiction

and/or & Active Treatment Remediation Active Monitored Natural Enhanced Attenuation Attenuation Passive (ITRC EACO-1, 2008) Sustainability of PRBs Generally passive treatment systems with little or no operation or maintenance (O&M) costs Tools available to evaluate site-specific sustainability See ITRC Green and Sustainable Remediation: State of the Science and Practice (GSR-1, May 2011) and ITRC Green & Sustainable Remediation: A Practical Framework (GSR-2, November 2011) PRBs generally more sustainable than other groundwater plume containment options (e.g., pump and treat)

Production and transportation of reactive media primary contributor to footprint See PRB-5, Section 9 PRB as Green and Sustainable Technology PRBs Ability to Use Recycled Media Reactive media may consist of recycled waste material Recycling Storm Waste for a Biowall at Altus AFB, Oklahoma (Photo courtesy US Air Force) Longevity Advantages of PRBs Initial capital cost and footprint of PRBs is offset by the long passive operating life Very low O&M labor and material costs Life spans reaching decades Technologies to rejuvenate PRBs expanding Summary of Whats New for PRB Performance and Longevity

More available monitoring tools and protocols Growing confidence in the reliability of PRBs ZVInow 200+ applications during 15+ years Mulch biowallsnow 8+ years monitoring how to optimize Best management practices during construction For biowalls, consider availability of sulfate and iron, and carbon replenishment (e.g., every 3 to 6 years) and how to make even more sustainable Use of recycled or locally-available material See PRB-5: Section 8.2, Boxes A and B PRB Update: Course Road Map Scott Warner AMEC Environment and Infrastructure

Oakland, California 510-663-4269 [email protected] Introduction Regulatory Considerations Science of PRBs Reactive Materials Improved Construction Methods Performance Monitoring Longevity of PRBs Enhancing Effectiveness Enhancing Long-Term Performance and Cost Effectiveness Focus areas Designing for site objectives Short-term goals vs. long-term goals

Designing for site conditions Site characterization for design purposes Considering secondary site issues Stormwater management Long-term site use Constructability Designing for Site Objectives Define short-term goals vs. long-term goals Determine goals based on the needs to promote (for example)

Source control Receptor protection Longevity Imminent protection Buying time Migration Direction Sr-90 Source 28-year Volume of Groundwater (represents the half-life of Sr-90 in this example) Permeable Treatment Zone (PRB) (Conceptual locations) Designing for Site Conditions Site characterization for design purposes Good characterization leads to sustainable design Key Parameters:

Example: note non-uniform plume distribution and variable at-depth lowpermeability boundary PRB design depth Laboratory-based longevity studies Contaminant exiting PRB (Conc.) Designing for Site Conditions (continued) 100,000.00 10,000.00 1,000.00 20 yr Treatment Goal 100.00 10.00 1.00 10 yr Treatment Goal 0.10

0.01 0 10 20 30 PRB operation (years) 40 Results of column testing to assess treatment under different scenarios. NOTE: Curve colors represent different scenarios, i.e., a.High/low flow rates b.High/low cationexchange capacity Longevity Predictions Fe-based PRB Corrosion (example) Chemical Reactions Secondary conditions to evaluate Fe(s) + 2H2O(l)

Fe2+ + 2OH- + H2(g) Dissolved hydrogen in pore water 800, 000 nM (approximate solubility) Effect on permeability Stimulation of biological processes Corrosion rate Theoretical lifetime of iron = 80 400 years * Specific surface area of iron granule Changes in redox (Eh/Ph) conditions Mineralization rate (e.g., as affected by pH) (* Reardon, E.J., 2005 and 1995) Considering Secondary Site Issues Stormwater management Long-term site use

Constructability Example Project Site Wetland area transportation corridor commercial sector residential sector Constructability Lower impact and surgical construction Sustainable (i.e., durable) materials Granular Iron Sand PRB Trench Within Building Focused and Design Specific Monitoring Program PRB ~3 feet wide Installation platform ~15 feet wide Water level

Surface of low K unit Groundwater flow direction 10 feet well screen 2.5 feet well screen 5 feet well screen Well screen (upgradient of PRB) Well screen (within PRB) Well screen (downgradient of PRB) Note: not to scale (after Michalczak, 2010) Single well

Well couplet Well cluster PRB What is on the Horizon for PRBs? Treatment of multiple/emerging contaminants Identification of additional treatment materials Faster reaction rates without loss of efficiency Innovative emplacement (e.g., deeper, targeted) See PRB-5, Section 11 Conclusions (Whats Next?) What is on the Horizon for PRBs? (continued)

Hydraulic design Monitoring Closure and decommissioning See PRB-5, Section 11 Conclusions (Whats Next?) Expected Future Developments PRBs have performed successfully for more than 15 years Technology Development Sensor Technology Flow/Velocity Devices Telemetry Advancement PRB Water table Remediated water Plume

Groundwater flow direction Continued R&D for New Treatment Materials Faster Reactions Multi-contaminant treatment Longevity Enhancements Dynamic Monitoring Program Reactions change with time Monitoring adjustment / time Goal adjustment / time See PRB-5, Section 11 Conclusions (Whats Next?) Improve Site Decision-Making: Use ITRCs PRB Guidance ITRC Technical and Regulatory Guidance Permeable Reactive Barrier: Technology Update (PRB- 5, 2011) See more ITRC PRB Information at: http:// www.itrcweb.org/prb

Thank You for Participating 2nd question and answer break Links to additional resources http://www.cluin.org/conf/itrc/prbtu/resource.cfm Feedback form please complete http://www.cluin.org/conf/itrc/prbtu/feedback.cfm Need confirmation of your participation today? Fill out the feedback form and check box for confirmation email.

Recently Viewed Presentations

  • Corrective feedback - University of St Andrews

    Corrective feedback - University of St Andrews

    The role of corrective feedback:formative assessment. Initial interest came when seeing how time-consuming and sometimes frustrating cf can be
  • Virtual Private Networks (VPNs) - SMU

    Virtual Private Networks (VPNs) - SMU

    MPLS Virtual Private Networks (VPNs) When VPN? Internet as your own private network Communicate securely between various corporate sites (Intranet) Communicate securely between partner sites (Extranet) Connect remote dial-up users securely to corporate networks Advantages Flexible and cost effective Better...
  • Alarm Sound Tutorial

    Alarm Sound Tutorial

    Please review each slide and listen to each alarm sound. We will also list "parameters" for some of the alarms. If the patient has a vital sign or value outside of the set parameters listed, an alarm will sound.
  • Assessing Reading and Writing Through Multi-Modal Digital ...

    Assessing Reading and Writing Through Multi-Modal Digital ...

    Remember this is the genre you'll be reading in as we prepare our Boards and Tweets. Be sure to fully answer the following questions: 1) What is the name of the genre, and how many books have you already read...
  • Improving Your Businesss Profitability Learn how to analyse

    Improving Your Businesss Profitability Learn how to analyse

    Gross Profit = Difference between Sales and Cost of Good Sold. Gross Margin . Generally is stated in percent . Gross Profit divided into Sales. Gross Margin Dollars is the same as Gross Profit. Sales =
  • From Central Administration - TU Wien

    From Central Administration - TU Wien

    Mogelijkheden van 1-MCP bij de bewaring van pitfruit. Mechanische onkruidbestrijding bij pitfruit. Witte asperge onder bescherming. Rooien van witloofwortels. ... Implementatie van PLC-S7 voor data-acquisitie met een weegschaal, gsm en JAVA-applicatie.
  • Internetes médiakommunikáció

    Internetes médiakommunikáció

    Internetes médiakommunikáció Bevezetés, alapfogalmak, fejlődési tendenciák, követelményrendszer Takács György Alapfogalmak Média, multimédia szavakra számos definíció lelhető Divatszavak, ehhez mindenki ért, Maradjunk a „nyomdász" szerepkörhöz illő meghatározásnál (ITU-T 16. study group).
  • Nursing 3703 Pharmacology in Nursing

    Nursing 3703 Pharmacology in Nursing

    More free drug (? Effect) Requires higher dose as volume increases. Reduced drug excretion (longer half-life) Metabolism. Immature liver with term newborns and children. Matures rapidly after about 1 month. Generally complete at 1 year. Increased drug sensitivity. Drug effects...